Se connecter
Se connecter

ou
Créer un compte

ou

Acheter neuf Soundtoys Decapitator

  • Thomann En stock / Livré en 48h 195,00 €
  • Plugin Boutique En stock / Livré en 24h 189,00 €

Annonces Decapitator

Alerte nouvelle annonce

News

Images

Vidéos

Avis

4.8/5
(4 avis)
75 %
(3 avis)
25 %
(1 avis)
Donner un avis
Cible : Tout public Rapport qualité/prix : Correct
sonicsnapsonicsnap

Chaud devant!

Soundtoys DecapitatorPublié le 20/12/13 à 18:25
Installation et autorisation simples, mais il faut une clé I-Lok.
Decapitator est un plug-in de saturation. On remarque tout de suite le gros potard "Drive" qui détermine le niveau de saturation, et juste à coté, le bouton "Punish", qui accentue l'effet jusqu'à la distortion, comme si le drive allait jusqu'à 20 au lieu de 10. On à ensuite deux filtres (Low Cut et High Cut) et un potard de tonalité (grave / aigu). Avec le Low Cut, on a un bouton "Thump" qui donne une légère résonance à la fréquence de coupure, et avec le High Cut, un bouton "Steep" qui fait passer la pente du filtre de 6 à 30db / octave. Reste un potard "dry / wet" (toujours pratique pour garder de bonnes transitoires) et...…
Lire la suite
Installation et autorisation simples, mais il faut une clé I-Lok.
Decapitator est un plug-in de saturation. On remarque tout de suite le gros potard "Drive" qui détermine le niveau de saturation, et juste à coté, le bouton "Punish", qui accentue l'effet jusqu'à la distortion, comme si le drive allait jusqu'à 20 au lieu de 10. On à ensuite deux filtres (Low Cut et High Cut) et un potard de tonalité (grave / aigu). Avec le Low Cut, on a un bouton "Thump" qui donne une légère résonance à la fréquence de coupure, et avec le High Cut, un bouton "Steep" qui fait passer la pente du filtre de 6 à 30db / octave. Reste un potard "dry / wet" (toujours pratique pour garder de bonnes transitoires) et un réglage d'output, qui, grâce au bouton "Auto" peut compenser automatiquement les variations de niveau selon l'intensité du drive et le "Style" choisis. Style? Quésaco? On a en effet cinq boutons de "Styles" (A,E,N,T,P) qui correspondent à différentes émulations. A émule la saturation d'un préamp de magnéto à bande, E et N celles de tranches de consoles et T et P celles d'un module de distortion vintage. Ces "Styles" sont décrits en détail dans le petit manuel d'une dizaine de pages. A noter pour les boutons "Thump", "Steep" et "Auto", qu'ils sont actifs lorsqu'ils sont relevés et désactivés lorsqu'ils sont abaissés, ce qui est inhabituel.


ADÉQUATION/PERFORMANCE

Ce plug-in fonctionne sans le moindre problème sur mon Mac Pro avec MacOS 10.6.8 et Digital Performer. La consommation en ressources CPU est insignifiante.


AVIS GLOBAL

J'utilise Decapitator depuis trois ans et demi. Je suis assez bien pourvu en plug-ins de distortion et saturation. Mais celui-ci se trouve essentiellement en concurrence avec l'énorme Ohmicide d'Ohm Force et le très sympathique Bad Buss Mojo de Stillwell Audio (cf. mes avis sur ces excellents plug-ins.) Les trois sont très bons et je n'ai pas de règle générale pour utiliser l'un plutôt que l'autre . Il faut tester. Decapitator peut aussi bien être utilisé à petite dose pour réchauffer un son (dans ce cas, j'aime bien les "Styles" A ou E), que de manière plus musclée avec le bouton "Punish" enclanché (là, je préfère généralement le "Style" T.) Dans les deux cas, il produit un effet de qualité et un son assez chaud: L'émulation analogique est plutôt réussie. Je l'ai déjà utilisé sur des voix (dans un cadre "indus") et sur des synthés, mais il fonctionne bien sur pratiquement n'importe quelle source. Très simple à régler, on obtient très vite ce qu'on cherche. Au total, je suis très content d'avoir Decapitator dans mon outillage et je referai ce choix malgré son prix relativement élevé que je trouve justifié au regard de sa qualité.
Lire moins
»
2HO2HO

Soundtoys DecapitatorPublié le 18/03/10 à 19:03
Installation rapide et pro, autorisation ILOK donc stable et rapide.
Pas d'incompatibilité sur macbook.
Manuel en pdf clair et bien fichu, même si les plugs soundtoys sont très intuitifs.

ADÉQUATION/PERFORMANCE

Sur macbook pro 2,53GHz avec 4Go de RAM
Plugin stable, pas de bug et depuis la version définitive il ne consomme plus trop de ressources CPU (entre 1 et 6% en fonction des réglages et de la complexité du signal traité).
Trois mois de tests publics en beta, avec deux versions, c'est du bon boulot sachant que la première version beta ne comportait chez moi que quelques micro bugs.

AVIS GLOBAL

La version beta est sortie en décembre et depuis je l'utilise dans chacun de mes mixs.
Lire la suite
Installation rapide et pro, autorisation ILOK donc stable et rapide.
Pas d'incompatibilité sur macbook.
Manuel en pdf clair et bien fichu, même si les plugs soundtoys sont très intuitifs.

ADÉQUATION/PERFORMANCE

Sur macbook pro 2,53GHz avec 4Go de RAM
Plugin stable, pas de bug et depuis la version définitive il ne consomme plus trop de ressources CPU (entre 1 et 6% en fonction des réglages et de la complexité du signal traité).
Trois mois de tests publics en beta, avec deux versions, c'est du bon boulot sachant que la première version beta ne comportait chez moi que quelques micro bugs.

AVIS GLOBAL

La version beta est sortie en décembre et depuis je l'utilise dans chacun de mes mixs.
Il s'agit d'une saturation de très bonne qualité avec des effets très vastes en fonction des réglages et un bouton "Punish" particulièrement dévastateur (d'où le nom du plug).
Pas essayé d'autres modèles car jusqu'à maintenant il m'a ébloui partout ou j'avais besoin de saturer le signal.
Rapport qualité prix je ne sais pas car l'upgrade du bundle V3 en V4 avec Decapitator et PanMan est seulement à 99€ ! Du coup je dirais imbattable pour les possesseurs du bundle V3 (je crois que le prix est de 179€ pour chacun des deux plugs achetés séparément).
Lire moins
»
S2DS2D

Des têtes vont tomber

Soundtoys DecapitatorPublié le 09/09/14 à 15:17
contenu en anglais (contenu en anglais)
There has never been such a suitably named plugin as the Soundtoys Decapitator, it really will take your head off with some of the sounds it can give to your tracks. Beginning with the installation, which is quite straight forward as most Soundtoys plugins are, no compatibility issues with Logic Pro 9 at all and when loaded up it is a very clear and engaging interface. The manual is always there for plugins of this nature but for this Soundtoys product i would recommend you just dive straight in and start playing around with the features. The Decapitator has an intuitive GUI and clearly labelled controls apart from the letters along the bottom but we'll get to that part later.

SUITABILITY/PERFORMANCE

I have been using the Decapitator for almost a year now and can confirm it works perfectly with Logic Pro 9 on a Mac computer with 4GB of RAM on OSX 10.6.8. It is very stable in my experience, no random crashes or anything like that. The performance is very good and is fairly light on CPU usage, although in any given project i can't recall using any more than 3 or 4 instances of the plugin but with no noticeable CPU spikes none the less. Some users may want to put 1 on every channel to get a subtle saturation effect for mixing into which i would recommend if you're CPU can handle it (bear in mind you would likely be using more plugins on top of the decapitators) otherwise try 1 on every sub mix or bus to get a taste of what it can do.

Now, onto the letters at the bottom. Each letter stands for a different saturation type that is based on real analogue consoles and hardware, so you can dial in settings for the other controls then switch between the letters and the effect will change slightly. Much like other plugins who are 'influenced' by real analogue hardware and consoles, they sometimes don't directly disclose what brand they have modelled because it hasn't been officially licensed, although in the Decapitator manual it does describe in some detail the gear that influenced the saturation types.
With the Decapitator, here are what the letters represent according to the manual;

A - Ampex 350 tape drive preamp (think Johnny Cash, Elvis, Sun/Stax/Chess records)
E - EMI TG console (think The Beatles, Pink Floyd)
N - Neve 1057 input channel (very thick low frequency content)
T - Triode (from the Thermionic Culture Vulture hardware unit)
P - Pentode (also from the Thermionic Culture Vulture hardware unit)

The difference between T and P is that T produces even harmonics and P produces odd harmonics.
So with all these different models, it really can be a one-stop-shop for saturation and distortion. As well as all of this, the plugin also features filters for cutting the low end and high end to remove some muddiness and high end fizz that can happen when really going for it with the drive setting. The thump switch is useful for kick drums or the low end of guitars because it adds a few extra decibels to the cut off frequency of the 'low cut' control. The Steep switch transforms a 6db per octave high end filter into a much steeper filter which can be used at a cut off around 4-5khz to simulate a guitar cabinet if desired. The Punish switch (as you can imagine) adds a ridiculous amount of distortion onto what you've already got, plus another 20db's of gain according the manual! If you're having a long day at the office then this switch will definitely perk you up a bit. Make sure to press the auto output switch in conjunction with the punish switch the first few times.

OVERALL OPINION

The thing i like most about the Decapitator is it does extreme but in a way that can be actually be used without sounding awful like some distortion plugins. The tone and low end/high end filter controls are very handy as well. Try it on a simple drum loop to hear the effect it has on each part of the kit, changing the letters at the bottom to get an idea of the character of the different hardware models. It is an incredibly useful plugin that can be used in every mix. You can use it sparingly if you wish, but The Decapitator is a lot like Will Smith, he did good just as a rapper but when he got into acting more and pushed the boat out that's when his true talent shone and things really took off... So sit back, max and relax and turn the drive up on this bad boy to really hear what it can do!

Overall, The Soundtoys Decapitator knows how powerful it is. Yes it can do subtle, but with a 'Drive' knob the size of Jupiter and a button that says 'Punish' - you know deep down that this plugin is truly in it's element when it's seriously distorting your audio. A fantastic saturation/distortion plugin with a not-so-fantastic price but still a must have when it comes to producing and mixing so start saving those pennies.
»
moosersmoosers

Soundtoys DecapitatorPublié le 14/02/10 à 06:01
contenu en anglais (contenu en anglais)
The SoundToys Decapitator is an analog saturation/overdrive plug-in. I wasn't involved with the process of installing the plug-in, as I used this on a system that was not my own. The interface of the software is generally pretty easy to use and is straight forward. As far as parameters go, you've got knobs for mix, low cut, tone, high cut, and drive. It also has a button for 'punish' and five buttons to choose between different preset styles. A manual isn't necessary in my opinion, even though I haven't seen it so I can't say anything about its make up.

SUITABILITY/PERFORMANCE

I have run SoundToys Decapitator on a Pro Tools HD system, so the performance I'm getting from it will be undoubtedly different from someone running it on a Pro Tools LE system or something comparable. However, this isn't the type of plug-in that will generally speaking take up too much processing power, so as long as you have a system where you're currently able to run plug-ins without a problem, I'd say that you probably shouldn't have any issues running this one.

OVERALL OPINION

These days there are a lot of plug-ins out there that aim and claim to add 'analog' warmth to your sound without actually inflicting any sort of analog component on the signal. For me, this is really an impossibility and I haven't found anything that will stand up to true analog gear and I don't think that I ever will. This being said, the SoundToys Decapitator sound pretty darn good for an 'analog' saturation plug-in. It isn't the end all be all by any long shot, but for adding some warmth here and there to your mixes, it will certainly be an asset. It won't cost too much money, making it the perfect addition to the plug-in suite for the home studio owner looking to compromise on a plug-in when a piece of analog gear might not be available.
»

Fiche technique

  • Fabricant : Soundtoys
  • Modèle : Decapitator
  • Catégorie : Distorsions / saturations logicielles
  • Poids du colis : 10 g
  • Fiche créée le : 04/10/2009

Decapitaor propose cinq différents modèles de saturation analogique au choix et est parfait pour ajouter du caractère à chaque type de piste et d'instrument dans vos mixages. Nous avons également inclus un contrôle de tonalité modélisé qui vous permet de façonner le son saturé ainsi qu' un contrôle de mixage qui vous permet de mixer un signal sec pour un traitement en parallèle sans avoir besoin de routage et de sous-mixage.

 

Formats de plug-in (32 et 64 bits):
• Native AAX, AAX AudioSuite, VST et Audio Unit (AU)
Fréquence d'échantillonnage acceptée:
• Minimum: 44,1 kHz, maximum: 192 kHz
Configuration requise:
• Systèmes d'exploitation: Mac OS X 10.8 ou ultérieur; Windows 7 ou plus
• Une connexion Internet est requise au moment de l'activation.
DAW compatibles:
• Pro Tools (10.3.5 ou ultérieur), Live, Cubase, Nuendo, Sonar, Logique, Digital Performer
• Cliquez ici pour voir notre liste complète d'applications hôtes compatibles.
Autres exigences:
• Compte iLok.com gratuit.

»

Distorsions / saturations logicielles concurrents

Autres catégories dans Effets et traitements logiciels

Autres dénominations : decapitator