Annonces Hot Rod Deville 410 III
Alerte nouvelle annonceForums Fender Hot Rod Deville 410 III
Images
Avis
4.0/5(1 avis)
100 %
Donner un avis
iamqmanA beaucoup mieux maintenant.
Publié le 25/05/11 à 19:35
(contenu en anglais)There are a couple new features in the Hot Rod 410 lll that are very important to me. The first one being that speaker that is standard is actually usable. They used to have some cheap speaker in there that wasn't very musical and a lot of guys would switch out the speaker for something much more sweeter in tone. The next feature is a usable gain channel two and three. Before they gain channels were so bad that I never even used them. They sounded terrible and nothing like a tube amp distortion.
Fender Hot Rod DeVille 410 III 60-watt, 4 x 10" Tube Guitar Amplifier Combo Features:
Amplifier type: Tube
Output power: 60 watts
Speakers: 4 x 10" special-design Eminence 8-ohm, 30-watt
Output impedance: 4 or 8 ohms
Preamp tubes: 3 x 12AX7
Power tubes: 2 x 6L6
Rectifier: Solid-state rectifier
Inputs: 2
Channels: 3 selectable channels (Normal, Drive, and More Drive)
Controls: Presence, Reverb, Master Volume, Middle, Bass, Treble, Drive Select Switch, Drive Volume, Bright Switch
Effects: Spring reverb
Effects loop: Effects loop (preamp output, power amp input)
Speaker jack: Extension-speaker jack
Amp covering/grille cloth: Textured black-vinyl covering with "Blackface"-style black/silver grille cloth
Footswitch: 2-button, 3-function footswitch included
Cover: Amplifier cover included
UTILIZATION
Details
Type Tube
Number of Channels Three
Power 60W
Speakers 4 x 10" Special Design Eminence
No Effects
Reverb Yes
EQ Treble, Bass, Middle
No Modeling
Preamp Tubes 3 x 12AX7
Power Tubes 2 x 6L6
Inputs 2 x Instrument
Outputs 1 x Speaker
Footswitch I/O Yes
Effects Loop Yes
Height 23.5"
Width 23.5"
Depth 10.75"
Weight 50 lbs.
SOUNDS
Now that they have a usable gain channel then this amp has much more flexibility that before. The old amps were just outright sloppy. The bad thing is that these amps are made in Mexico. So they are going to be cheaper made and will break down on you a lot quicker. I'm not sure if they fixed the jewel light from going out on this model. Everyone who owned this amp knows that the light always goes out on these things.
Anyway, use this amp with any nice guitar. I like this amp with a solid Gibson Les Paul. I used it with a Line 6 Dl4 and a Ibanez Ts9 and I had some great tones that cut through the band quite well.
OVERALL OPINION
If you are on the market for a good tube amp that has two moderate low gain but usable gain then this might be the amp for you. However I would never buy this amp since its made in Mexico. For the price of this amp I would buy a used Marshall JCM2000. At new these amps come in at around $899. You can even pick up a Peavey 5150 for the price of this thing.
Fender Hot Rod DeVille 410 III 60-watt, 4 x 10" Tube Guitar Amplifier Combo Features:
Amplifier type: Tube
Output power: 60 watts
Speakers: 4 x 10" special-design Eminence 8-ohm, 30-watt
Output impedance: 4 or 8 ohms
Preamp tubes: 3 x 12AX7
Power tubes: 2 x 6L6
Rectifier: Solid-state rectifier
Inputs: 2
Channels: 3 selectable channels (Normal, Drive, and More Drive)
Controls: Presence, Reverb, Master Volume, Middle, Bass, Treble, Drive Select Switch, Drive Volume, Bright Switch
Effects: Spring reverb
Effects loop: Effects loop (preamp output, power amp input)
Speaker jack: Extension-speaker jack
Amp covering/grille cloth: Textured black-vinyl covering with "Blackface"-style black/silver grille cloth
Footswitch: 2-button, 3-function footswitch included
Cover: Amplifier cover included
UTILIZATION
Details
Type Tube
Number of Channels Three
Power 60W
Speakers 4 x 10" Special Design Eminence
No Effects
Reverb Yes
EQ Treble, Bass, Middle
No Modeling
Preamp Tubes 3 x 12AX7
Power Tubes 2 x 6L6
Inputs 2 x Instrument
Outputs 1 x Speaker
Footswitch I/O Yes
Effects Loop Yes
Height 23.5"
Width 23.5"
Depth 10.75"
Weight 50 lbs.
SOUNDS
Now that they have a usable gain channel then this amp has much more flexibility that before. The old amps were just outright sloppy. The bad thing is that these amps are made in Mexico. So they are going to be cheaper made and will break down on you a lot quicker. I'm not sure if they fixed the jewel light from going out on this model. Everyone who owned this amp knows that the light always goes out on these things.
Anyway, use this amp with any nice guitar. I like this amp with a solid Gibson Les Paul. I used it with a Line 6 Dl4 and a Ibanez Ts9 and I had some great tones that cut through the band quite well.
OVERALL OPINION
If you are on the market for a good tube amp that has two moderate low gain but usable gain then this might be the amp for you. However I would never buy this amp since its made in Mexico. For the price of this amp I would buy a used Marshall JCM2000. At new these amps come in at around $899. You can even pick up a Peavey 5150 for the price of this thing.
00
»
Fiche technique
- Fabricant : Fender
- Modèle : Hot Rod Deville 410 III
- Série : Hot Rod Deville
- Catégorie : Amplis combos tout lampe pour guitare
- Fiche créée le : 25/05/2011
Le Hot Rod DeVille III 410 est un combo tout lampes 2 canaux (3 selon Fender) de 60W équipé de 4 haut-parleurs Fender Special Design 10". Fender a introduit ce modèle en 2011 en remplacement du Hot Rod Deville 410.
General
Electronics
Speakers
Hardware
Tubes
Dimensions & Weight
- Model Name: Hot Rod DeVille 410 III
- Series: Hot Rod
- Model Number:
- 2230106000 (230V. 50Hz) EUR (donc France)
- 2230100000 (120V, 60Hz) USA
- 2230101000 (110V, 60Hz) TW
- 2230103000 (240V, 50Hz) AUS
- 2230104000 (230V, 50Hz) UK
- 2230105000 (220V, 50Hz) ARG
- 2230107000 (100V, 50/60Hz) JPN
- 2230109000 (200V, 60Hz) ROK
- Color: Black and Silver
Electronics
- Wattage: 60W
- Inputs: 2 (Input 1 1M, Input 2 136K)
- Channels: 3 (Normal, Drive and More Drive)
- Controls:
- Channel 1: Volume, Normal/Bright switch
- Channel 2: Drive, Master
- "Channel 3": More Drive switch
- Shared Controls: Treble, Bass, Middle, Master, Reverb, Presence
- Switches: Channel Select, Standby, Power on/off
- Effects Loop: 1/4" Preamp out (1.5K), Power Amp In (54K)
- Footswitch input: 2-Button Footswitch Gain / Channel included (079606)
- Rectifier: Solid State
Speakers
- 4 x Fender Model V 1030 Special Design, 10", 8 ohms
Hardware
- Cabinet Material: 7-Ply 3/4" Birch/Maple Plywood
- Handle: Molded Rubber "Dog Bone" Style
- Front Panel: Black
- Control Knobs: Chicken-Head Style Pointer
Tubes
- Preamp Tubes: 3 x 12AX7
- Power Tubes: 2 x 6L6
Dimensions & Weight
- Dimensions (WxHxD): 23.5 x 23.5 x 10.75" / 59.7 x 59.7 x 27.3 cm
- Weight:50 lb / 22.7 kg
Source : http://intl.fender.com/en-CA/series/hot-rod/hot-rod-deville-410-iii-120v-black/
Distribué par fenderfrance
»
Manuels et autres fichiers
Autres amplis combos tout lampe pour guitare Fender
![Fender Champion 600 [2007-2012]](https://img.audiofanzine.com/img/product/normal/5/9/59719.jpg?fm=pjpg&w=300&h=218&fit=fill&s=ec837d766827f331525774e253e92eba)
Autres catégories dans Combos guitare
Autres dénominations : 2230106000, 2230100000, hot rod deville 3 410, hot rod deville iii 410, hot rod deville 410 iii, hotroddeville 410 iii, hotroddeville410iii, hotroddeville410 iii, hot rod deville410 iii, hot rod deville 410iii, hot rod deville 410 3, hotroddeville 410 3, hotroddeville4103, hotroddeville410 3, hot rod deville410 3, hot rod deville 4103, hotrod 410 iii, hotrod410iii, hotrod410 iii, hot rod410 iii, hot rod 410iii, hot rod 410 3, hotrod 410 3, hotrod4103, hotrod410 3, hot rod410 3, hot rod 4103