Se connecter
Se connecter

ou
Créer un compte

ou
Ajouter ce produit à
  • Mon ancien matos
  • Mon matos actuel
  • Mon futur matos
Peavey 6505 212
Photos
1/46

Peavey 6505 212

Ampli combo tout lampe pour guitare de la marque Peavey appartenant à la série 6505

2 avis

Annonces 6505 212

Alerte nouvelle annonce

Images

Avis

4.3/5
(2 avis)
100 %
(2 avis)
Donner un avis
kepingapkepingap

Gros son, polyvalence, il assure !

Peavey 6505 212Publié le 25/07/10 à 22:08
Amplification lampe, 5*12AX7 et 2*6L6GC.
Une entrée avec switch high/low.
2 canaux, EQ 3 bandes, resonance, présence, boucle et le footswitch (passage d'un canal à l'autre, et activation ou non de la boucle).

Tout ça délivre 60 vrais Watts (sous 16, 8 ou 4 Ohms), bien costaud dans 2 HP de 12.
On frôle les 40 Kg, assez lourd, les roulettes seront bienvenues par la suite (facile à monter sois-même).


UTILISATION

La configuration est simple, on le prend vite en main. Il n'y a pas 50 réglages possibles ce qui facilite la tache.
On plug et on joue très vite.
Les réglages sont donc efficaces, sans être extraordinaire, mais avec une bonne guitare derrière ils suffisent largement.
Le canal...…
Lire la suite
Amplification lampe, 5*12AX7 et 2*6L6GC.
Une entrée avec switch high/low.
2 canaux, EQ 3 bandes, resonance, présence, boucle et le footswitch (passage d'un canal à l'autre, et activation ou non de la boucle).

Tout ça délivre 60 vrais Watts (sous 16, 8 ou 4 Ohms), bien costaud dans 2 HP de 12.
On frôle les 40 Kg, assez lourd, les roulettes seront bienvenues par la suite (facile à monter sois-même).


UTILISATION

La configuration est simple, on le prend vite en main. Il n'y a pas 50 réglages possibles ce qui facilite la tache.
On plug et on joue très vite.
Les réglages sont donc efficaces, sans être extraordinaire, mais avec une bonne guitare derrière ils suffisent largement.
Le canal clean sort des sons cristallins, que l'on peut pousser (via switch) afin de driver le son et obtenir un petit crunch bien agréable.
Le canal de satu est tout bonnement démentiel, gros son assuré !!! Le son est très typé, grosse disto "ricaine" au rendez-vous avec la patte Peavey.
L'ampli se positionne donc plus dans registre rock-métal mais on peut très vite se laisser surprendre par sa polyvalence, il marchera très bien en blues voir Jazz... si si !

SONORITÉS

Je joue principalement du rock, gros rock indus avec Gibson Les Paul, Strat', Musicman et cette ampli à bien trouvé sa place dans ce registre.

Le son est riche, avec beaucoup d'harmoniques, de bonne basse (le couple de 12 n'y est pas pour rien...) et des aigus qui ne vous font pas sifflez les oreilles après une demie heure d'utilisation...
J'ai donc été agréablement surpris par la qualité de ce combo, et surtout par sa polyvalence. Il a été utilisé un bon mois chez un guitariste jazz, soul, pour dépanner, et le monsieur à été conquis par la bête.
A noter qu'avec de bonne guitare, le son à la base est déjà bon, l'ampli lui ne fait qu'amplifier le signal et celui là le fait très bien ! Voilà ce que je cherchait.

AVIS GLOBAL

Je l'utilise toujours, depuis que je l'ai acquis, et je referais ce choix sans aucuns doute.
Le prix d'occasions est clairement abordable pour rentrer dans le monde du tout lampe, je pense que c'est un bon premier choix pour qui ne sait pas encore quel amplis tout lampe choisir.
Son défault est donc sa polyvalence avec un manque de personnalité...
Lire moins
»
iamqmaniamqman

Awesome!

Peavey 6505 212Publié le 26/05/11 à 00:51
contenu en anglais (contenu en anglais)
For the money it doesn't get much better than this amp. This amp comes just over the $1000 but pack quite a punch for the money. The tone from the 6505 is just geared towards rock, hard rock, and metal. This is just a brutal amp with tones of tone for any guitar player.

Peavey 6505 Guitar Amplifier (2x12 inch) Features

60 Watts RMS into 16 or 8 Ohms
Five 12AX7 preamps tubes & two 6L6GC power amp tubes
Footswitchable lead/rhythm channel select & reverb defeat
Three-band EQ, resonance & presence controls
Rhythm channel: pre-/post-gain controls, bright/crunch switches
Lead channel: pre-/post-gain controls
Two Sheffield® 1200 12" speakers in a closed-back cabinet
Footswitch included
Cover available

UTILIZATION

Peavey 6505 212 Guitar Amplifier Specifications

Power Amplifier Section
Rated Power and Load: 60 W RMS into 16, 8 ohms
Power @ Clipping (Typically @ 5% THD, 1 kHz, 120 V AC line): 65 W RMS into 16, 8 ohms
Frequency Response: +0, -3 dB, 50 Hz to 20 kHz, @ 50 W RMS into 8 ohms
Hum & Noise: Greater than 74 dB below rated power
Power Amp EQ:
Active Presence: +10 dB @ 2 kHz
Active Resonance: + 10 dB @ cabinet resonant frequency
Power Consumption: 200 watts 50/60 Hz, 120 V AC (Domestic)

Preamp Section
The following specs are measured @ 1 kHz with the controls preset as follows:

Low & High EQ @ 10
Mid EQ @ 0
Bright out
Lead & Rhythm Posts @ 10
Presence & Resonance @ 0 dB
Nominal levels with Pre Gains @ 5
Minimum levels with Pre Gains @ 10
Preamp High Gain Input: Impedance: Very High-Z, 470K ohms
Lead Channel (with channel select in):
Nominal Input Level: -80 dBV, .1 mV RMS
Minimum Input Level: -92 dBV, .025 mV RMSM
Clean Channel: (with channel select out)
Nominal Input Level: -21 dBV, 85 mV RMS
Minimum Input Level: -32 dBV, 25 mV RMS
Maximum Input Level: 0 dBV, 1.0 V RMS
(Subtract 16 dB with Crunch switch in)
Preamp Low Gain Input (-6 dB pad):
Impedance: High-Z, 44K ohms
All levels are increased by +6 dB
Effects Send:
Load Impedance: 47K ohms or greater
Nominal Output: -10 dBV, 300 mV RMS
Effects Return:
Impedance: Very High-Z, 470K ohms
Designed Level: -10 dBV, 300 mV RMS
Preamp Output:
Load Impedance: 47K ohms or greater
Nominal Output: +10 dBV, 3 V RMS
Remote Footswitch:
Special 2 button unit with LED indicators (supplied)
Channel select & reverb
System Hum & Noise @ Nominal Level (Clean channel):
(20 Hz to 20 kHz unweighted)
Greater than 60 dB below rated power
Equalization:
Custom Low, Mid & High passive type EQ
Push Bright (Rhythm channel only): +6 dB @ 2 kHz
Push Crunch (Rhythm channel only): Increases gain
Dimensions: 24.125" (H) x 30.125" (W) x 12" (D) (612.775 mm x 765.175 mm x 304.8 mm)
Weight: 84.5 lbs. (38.33 kg)

SOUNDS

This amp needs to be played with a humbucker pickup guitar such as a Gibson Les Paul or a Gibson Explorer. It needs that rock guitar for the gain style this amp produces. You can play any guitar single coil or humbucker but I think it sounds the best with the proper high gunner pickup.

The resonance and presence controls really enable this amp to do what you want with the the bottom end of the tone. The two controls are the key to this amp in my opinion.

OVERALL OPINION

At new these amps come in at around $600 which is a freaking steal of a price. You can get a lot for this kind of money but you sure can get a stellar sounding Peavey amp. I would recommend this amp to anyone needing to stay within a tight budget and needs a proper sounding metal or hard rock amp.
»

Fiche technique

  • Fabricant : Peavey
  • Modèle : 6505 212
  • Série : 6505
  • Catégorie : Amplis combos tout lampe pour guitare
  • Fiche créée le : 28/06/2005
Caractéristiques :
  • 60 Watts RMS sous 16 ou 8 Ω ( 5x12AX7 + 2x6L6GC )
  • 2 x HP Sheffield® 1200 12"
  • Caisson fermé
  • 2 entrées High/Normal
  • 2 canaux switchables Lead/Rhythm
  • EQ 3 bandes, Resonance & Presence
  • Canal Rhythm : Pre/Post Gain, Bright/Crunch switches
  • Canal Lead : Pre/Post Gain
  • Reverb assignable avec contrôle de niveau
  • Boucle d'effets (post-EQ)
  • Dimensions : 617mm-H x 765mm-L x 305mm-P
  • Footswitch inclu

Source : Peavey

Distribué par Face

»

Manuels et autres fichiers

Autres catégories dans Combos guitare

Autres dénominations : 6505212, 650 5212