Se connecter
Se connecter

ou
Créer un compte

ou

Acheter neuf Radial Engineering Catapult TX4

  • Thomann En stock / Livré en 48h 278,00 €
  • Woodbrass Pas de stock / Livré en 24h 278,00 €
  • Global Audio Store Pas de stock / Livré en 10 jours 319,00 €

Annonces Catapult TX4

Alerte nouvelle annonce

Images

Avis

4.0/5
(2 avis)
100 %
(2 avis)
Donner un avis
Cible : Utilisateurs avertis
jean33marceljean33marcel

Au revoir les multis long lourd et les buzz.

Radial Engineering Catapult TX4Publié le 13/03/20 à 12:52
Me sert a pluger ma façade son avec 2 cables rj 45 cat 5,6 , je ressort de mon rack Dx 168 qui attaque le processeur Galiléo , qui lui rentre dans les 2 radial , je ressort avec les 2 rj 45 pour pluger ma facade son , gain de temps de cables et de buzz .
»
melimelomanmelimeloman

Très pratique

Radial Engineering Catapult TX4Publié le 14/10/16 à 21:41
Cet appareil s'utilise avec un RX4 ou RX4M. Le but est de mettre un émetteur (TX) et un receveur (RX) et un fil reseau entre eux. c'est en quelque sorte un snake à 4 entrées et sorties pouvant être utilisé avec un niveau d'impédence micro ou ligne. C'est très pratique pour un studio équipé de connexions reseau. Entre les pièces.
»

Fiche technique

  • Fabricant : Radial Engineering
  • Modèle : Catapult TX4
  • Catégorie : Convertisseurs Analogiques Numériques
  • Poids du colis : 1.1 kg
  • Fiche créée le : 21/01/2016

Transmit module with 4 XLR-F inputs and 4 XLR-M outputs

The Radial Catapult is a modular snake system that drives four analog or AES audio channels over a single shielded Cat 5 cable. The Catapult enables system contractors to take advantage of pre-wired networks to connect one room to another, and allows live sound technicians to take advantage of the low cost of Cat 5 cable for return or cross-stage snakes.
The modular Catapult is available in six configurations with a choice of three input and three output modules. Each input module includes four XLR-F inputs, four XLR-M outputs and two Neutrik Ethercon™ outputs. Each output module features an Ethercon input, a throughput and two sets of four XLR-M outputs. Modules can be ordered without transformers for sub-snakes or to transmit AES digital signals; with mic isolation transformers to provide split outputs for FOH, monitors or a recording system; or with line level isolation transformers to eliminate system noise. Ground lift switches are provided at each end of the Ethernet cable connection to help eliminate hum and buzz caused by ground loops.

»

Autres catégories dans Convertisseurs audio hardware (DAC)

Autres dénominations : catapulttx4, catapult tx 4