close
subdirectory_arrow_left subdirectory_arrow_left Convertisseurs Numériques Analogiques
Matériel Convertisseurs Numériques Analogiques {{currentManName}}swap_horiz Fostexswap_horiz Rechercher une marquekeyboard_arrow_down

Fostex HP-A4BL

Fostex HP-A4BL
+

Fiche technique

  • Fabricant : Fostex
  • Modèle : HP-A4BL
  • Catégorie : Convertisseur Numérique Analogique
  • Fiche créée le : 25/01/2016
Afficher les caractéristiques

* Equipped with 4-pin XLR balanced output

* Newly developed audio-grade capacitor is adopted

* Highly precise crystal with low phase noise is adopted

* Playback 24bit/192kHz PCM and 11.2MHz DSD audio

* High performance DAC (Barrbrown PCM1792A) is equipped

* Asynchronous transfer up to 192kHz/24bit compatible with USB Audio 2.0 * HI/LO Gain selection (10dB) for wider selection of headphones

* Digital Filter selecting Roll-Off characteristics and Cut-off frequencies

INPUT

  • [USB] terminal
  • Interface :USB 2.0 Hi Speed
  • Sampling Frequencies :PCM 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz DSD 2.8MHz, 5.6MHz, 11.2MHz
  • Quantization :16bit, 24bit
  • [Digital In] terninal
  • Connector :Optical, Square
  • Format :S/PDIF
  • Sampling Frequencies :44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
  • Quantization :16bit, 24bit

OUTPUT

  • [PHONES BALANCED] terminal
    • Connector :XLR (4-pin)
    • Maximum output :300mW or more (32 ohm)
    • Load impedance :16 - 600 ohm
    • THD :less than 0.04% (at 1kHz)
    • Frequency Response :20Hz - 80kHz (+-3dB, 32 ohm, 100mW)
  • [PHONE UNBALANCED] terminal
    • Connector :1/4" stereo jack
    • Maximum output :300mW or more (32 ohm) Applicable load impedance :16 - 600 ohm
    • THD :less than 0.04% (at 1kHz)
    • Frequency Response :20Hz - 80kHz (+-3dB, 32 ohm, 100mW)
  • [OUTPUT] (L,R) terminal (Analog output)
    • Connector :RCA Pin
    • Reference output level :2Vrms (0 dBFS)
    • Applicable load impedance :less than 10k ohm
    • THD :less than 0.01% (at 1kHz) 
    • Frequency Response :20Hz - 80kHz (+-3dB)
  • [DIGITAL OUT] terminal
    • Connector :Optical (square)
    • Format :S/PDF
    • Frequency Response :44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
    • Resolution: 16, 24bit

GENERAL

  • [microSD] card slot (for firmware upgrade only) Format: FAT32
  • Compatible card: microSD card (SDHC), up to 32GB
  • Accessories :Rubber foot (x4), USB cable, Manual, AC adapter
  • Power supply :DC12V
  • Measurements :150(W) x 34(H) x 157(D)mm including protrusion

Weight :approx. 630g

Masquer les caractéristiques

Photos

News

Forums Fostex HP-A4BL

Autres dénominations : hpa4bl, hp a 4bl, hp a4 bl, hpa4 bl