subdirectory_arrow_left subdirectory_arrow_left Compresseurs de studio
Matériel Compresseurs de studio {{currentManName}}swap_horiz Manley Labsswap_horiz Rechercher une marquekeyboard_arrow_down

Manley Labs Slam! Mastering Version

Manley Labs Slam! Mastering Version

Fiche technique

  • Fabricant : Manley Labs
  • Modèle : Slam! Mastering Version
  • Catégorie : Compresseur de studio
  • Fiche créée le : 25/08/2013
Afficher les caractéristiques

Input Tubes: 2 x 12AT7A NOS GE specially selected by Manley Labs for lo-noise and stable bias

Output Tubes: 2 x 6414W NOS USA dual triodes

I/O: MANLEY transformer coupled Balanced Inputs and Outputs

Gain: 20dB max Limiter Gain

Input Impedance:

FET Limiter: Attack: approx. 100μS; Release: 10mS to 2Sec; Ratio: better than 20:1

ELOP Limiter: Attack: approx. 10mS for 6dB GR; Release: 2.5 Sec; Ratio: 10:1

Frequency Response: 5Hz to 60KHz

Maximum Output: +32dBm, +30dBm (into 1KΩ load)

THD+N: <.05% @ 1KHz

Dynamic Range: 115dB typical

Output Impedance: 200Ω

Power Consumption Slam! Analog: 0.480 Amps (480 milliamps = 480mA) @ 120V = 57.6 Watts 0.240 Amps (240 milliamps = 240mA) @ 240V = 57.6 Watts

Outboard Power Supply: factory set for 100V, 120V or 220-240VAC operation for original destination country's mains voltage.

Operating Mains Voltage: changeable with power transformer re-wiring via switch and fuse value change.

Mains Voltage Frequency: 50~ 60Hz

Size: 19” X 12” X 3.5” (occupies 2u)

Shipping Weight: 25 lbs.

Masquer les caractéristiques


Acheter neuf Manley Labs Slam! Mastering Version

Compresseurs de studio concurrents

Autres Compresseurs de studio Manley Labs

Autres dénominations : slam! masteringversion, slam!masteringversion