subdirectory_arrow_left subdirectory_arrow_left Consoles DJ 4 voies et plus
Matériel Consoles DJ 4 voies et plus {{currentManName}}swap_horiz PLAYdifferentlyswap_horiz Rechercher une marquekeyboard_arrow_down

PLAYdifferently MODEL 1

PLAYdifferently MODEL 1

Fiche technique

  • Fabricant : PLAYdifferently
  • Modèle : MODEL 1
  • Catégorie : Console DJ 4 voies ou plus
  • Fiche créée le : 03/05/2016
Afficher les caractéristiques




TDK 60mm faders

EQ: SCULPT is a semi-parametric swept bell filter, and consist of two controls,FREQ which sets the centre frequency and CUT/BOOST which adjust the gain or a attenuation at this frequency. The level of cut/boost is asymmetric; maximum boost is limited to +8dB, while the cut is extended to -20dB. Sculpt has a wide Q and a frequency range that covers almost seven octaves.

CONTOURING LOW & HIGH PASS FILTERS: low Q, High-Pass and Low-Pass filters designed not to add colour to the sound as they are swept across their frequency range.

ANALOG OVERDRIVE on every input

Two independent Cue systems, A and B. Cue A routes to the right hand side headphone monitor and the Cue B routes to the left hand headphone monitor. The DualCue system makes it much easier for two DJs to perform on the mixer together in "Back2Back" setups, as each can select a separate channel to monitor without interfering with the other. This feature also assists DJ's handing off to each other in a smooth and natural way.

Fully balanced main mix bus

MIXER LINK: A system that allows multiple mixers to be linked together, either for use with two or more performers, or as a way to expand the number of channels. When Linked together the mixers share a common balanced mix feeding the PA and Booth monitors. In addition, the two Cue systems are joined allowing interactive cueing between multiple performers.


Three-Band Master EQ with asymmetric cut and boost, -20/+6dB

A 2-Band equaliser allowing the user to adjust the frequency response of the Booth monitors to suit their own preference.

All internal routing utilizes our zero-crossing detection system that helps minimize audio switching artifacts for channel filter selection, master filter on/off and master eq on/off. This system allows each of these functions to be used quickly and intuitively as performance effects.

external 90W 24V universal voltage PSU

Two fully balanced TASCAM DB25 inputs receiving all 8 Stereo channels for rapid connections to external soundcards and added flexibility in club installs.

Fully balanced TASCAM DB25 output for sending Master, Aux 1 & 2 Sends and Cue B channels down a single connector for rapid connections to external soundcards and added flexibility in club installs.

Mounted on the front panel at the top of the Master section the RECORD OUT - 3.5mm TRS Jack socket feeds the post Master EQ signal as a pre- fader record output. Nominal level is –2dB

Built in the UK with our partners DigiCo and Allen & Heath using alloy/steel chassis

Maximum output level +28dBu Balanced +23dBu Unbalanced
Output Impedance 50R Balanced, 68R Unbalanced
Residual Noise -100dBu Un-weighted, 22Hz to 20kHz
Dynamic range > 112dB
Frequency Response 20Hz - 40kHz +0/-2dB
Distor on (THD+N) 0.008% Line In to Mix 1 out, 0dBu Unity Gain
Inter-channel Crosstalk < -100dB
Le'/Right Crosstalk -80dB 1kHz
Power consumption 50W maximum
Weight 5.40kG 
Dimensions L 37cm x W 32cm x H 11.5cm 
Masquer les caractéristiques


Voir toutes les vidéos PLAYdifferently MODEL 1


Voir toutes les photos PLAYdifferently MODEL 1


Voir toutes les news PLAYdifferently MODEL 1

Forums PLAYdifferently MODEL 1

Acheter neuf PLAYdifferently MODEL 1

Argus du PLAYdifferently MODEL 1

Les prix indiqués dans les petites annonces des particuliers sur Audiofanzine ne sont pas nécessairement les véritables prix de vente ou d'achat.
Les annonces avec options, ou constituant un pack, ne sont pas prises en compte.
Moyenne des 3 annonces : 2700

Consoles DJ 4 voies et plus concurrents

Autres dénominations : model1