Se connecter
Se connecter

ou
Créer un compte

ou
Ajouter ce produit à
  • Mon ancien matos
  • Mon matos actuel
  • Mon futur matos
DiGiCo S31
Photos
1/4

DiGiCo S31

Console numérique de la marque DiGiCo

Écrire un avis ou Demander un avis

Acheter neuf DiGiCo S31

  • Thomann En stock / Livré en 48h 9 333,00 €

Annonces S31

Alerte nouvelle annonce

News

Images

Fiche technique

  • Fabricant : DiGiCo
  • Modèle : S31
  • Catégorie : Consoles numériques
  • Poids du colis : 34.5 kg
  • Fiche créée le : 26/03/2018

Console numérique 96kHz 48 entrées, 16 aux/sous groupes, LR, matrice 10x8, 4 eq, 4 digitubes, 4 compresseurs multibandes, effets numériques, 16 eq graphiques...

General Specifications

  • 46 busses: 16 x flexi-busses Mono/Stereo (equivalent of 32 DSP busses), Stereo Master (2), Solo busses (2 stereo, 4 total), and 10 x 8 Matrix (8)
  • 10 x Control Groups
  • 1 x Compressor per channel and buss
  • 1 x Gate per channel and buss (switchable to ducker, or compressor with side chain access)
  • 16 x assignable 32 band Graphic EQs
  • 8 x FX engines (reverbs, delays, w/modulation and enhancer)
  • 4 x assignable DiGiTuBes
  • 4 x assignable Multiband Comps
  • User definable Macros
  • An extremely high power headphone amplifier with 1/4 inch and mini jack socket
  • 96kHz as standard
  • 24 mic line inputs
  • 12 analogue outs
  • 2 AES I/O (mono)
  • Word Clock I/O
  • 1 GPI and 1 GPO
  • DVI out (for an external monitor)
  • 2 DMI Card slots (up to 64 I/O per slot)
  • 2 Ethernet connections for Networking
  • 2 x 24 segment master/solo meters
  • Touch sensitive rotaries with integrated switch & HTL
  • 3 x multi-touch screens
  • 31 x touch sensitive moving faders
  • 4 x layers of banks of 10 faders
  • Customisable bank and channel layout
  • Snapshots
  • Integrated USB2 Audio I/O interface for recording and playback of up to 48 channels 40 x Input flex-channels Mono/Stereo (equivalent of 80 DSP channels)

Audio Specification

  • Sample Rate 48kHz, 96kHz
  • Processing Delay 2ms Typical @ 48k(60 Stereo Channels, Stage
  • Input Through L-R Buss to Stage Output) 1.1ms @ 96kHz
  • Internal Processing Up to 40-bit, Floating Point
  • A>D & D>A 24-bit Converter Bit Depth
  • Frequency Response +/- 0.6dB (20Hz – 20kHz)
  • THD <0.05% @ Unity Gain, 10dB Input @ 1kHz
  • Channel Seperation Better Than 90dB (40Hz – 15kHz)
  • Residual Output <90dBu Typical
  • Noise (20Hz - 20kHz)
  • Microphone Input Better Than -126dB Equivalent Noise
  • Maximum Output Level +22dBu
  • Maximum Input Level +22dBu

Processing Channel Specification
Input Channel

  • Input Name User-Defined
  • Channel Selection Mono / Stereo
  • Input Routing Main Input
  • Analogue Gain -20 to +60dB
  • Phase Normal / Reverse
  • Digital Trim 40 to +40dB
  • Delay 0 - 682ms
  • DiGiTuBe Drive 0.01 - 50.0
  • Bias 0 - 6
  • LPF 20 – 20kHz, 24dB/Oct
  • HPF 20 – 20kHz, 24dB/Oct
  • Insert A (Pre EQ/Dyn) On/Off
  • Equalisation 4 Band EQ: Parametric or Dynamic (Low/Lowshelf, Lower-Mid/Lowshelf, Upper-Mid/
    Hishelf, Hi/Hishelf)
    On/Off
    Freq; 20 – 20kHz
    Gain; +/- 18dB
    Q: 0.1 -20 (Parametric) / 0.10-0.90 (Shelf)
  • Dynamics 1 Single or 4 x Multiband (3-Band)
    Compressor On/Off
    Threshold; -60 – 0dB
    Attack; 500us – 100ms
    Release; 5ms – 5s
    Ratio; 1:1 – 50:1
    Gain; 0 to +40dB
    Hi Crossover; 20Hz – 20kHz
    Lo Crossover; 20Hz – 20kHz
    Knee : Hard, Med, Soft
  • Dynamics 2 On/Off
    Gate / Ducker Threshold; -60 – 0dB
    Attack; 50us – 100ms
    Hold; 2ms – 2s
    Release; 5ms – 5s
    Range; 0 - 90dB
    Key; Any Source
    Key Listen
    Freq/Width; 20 – 20kHz
    Compressor On/Off
    Threshold; -60 – 0dB
    Attack; 500us – 100ms
    Release; 5ms – 5s
    Ratio; 1:1 – 50:1
    Gain; 0 to +40dB
    Link; Any Channel / Buss
    S/C Source : Any Source
    S/C Listen : On/Off
    S/C Filter Freq/Width: 20Hz – 20kHz
  • Insert B (Post EQ/Dyn) On/Off
  • Mute Channel Mute
  • Solo Solo Buss 1 / Solo Buss 2 / Both,
  • Channel Safe Socket Properties, Input Route, Mono/Stereo, Label, Filters, Trim, Delay, Tube, Insert A, EQ, Dyn1, Dyn2, Insert B, Aux, Group Assigns, Pan, Fade, Mute, Direct Outs, Full Safe
  • Output Routing Buss,
  • Insert A, Insert B,
  • Direct: Post-Fade
  • Fader 100mm Motorised Fader ∞ to +10dB

Processing Channel Specification
Aux / Group / Matrix Output

  • Name User-Defined
  • Phase Normal / Reverse
  • Digital Trim -40 to +40dB
  • Delay 0 - 682ms
  • DiGiTuBe Drive 0.01 - 50.0 Bias 0 - 6
  • LPF 20 – 20kHz, 24dB / Oct
  • HPF 20 – 20kHz, 24dB / Oct 
  • Insert A (Pre EQ/Dyn) On/Off
  • Equalisation 4 Band EQ: Parametric or Dynamic (Low/Lowshelf, Lower-Mid/Lowshelf, Upper-Mid/Hishelf, Hi/Hishelf)
    On/Off
    Freq; 20 – 20kHz
    Gain; +/- 18dB
    Q: 0.1 -20 (Parametric) / 0.10-0.90 (Shelf)
  • Dynamics 1 Single or 4 x Multiband (3-band)
    Compressor On/Off
    Threshold; -60 – 0dB
    Attack; 500us – 100ms
    Release; 5ms – 5s
    Ratio; 1:1 – 50:1
    Gain; 0 to +40dB
    Hi Crossover; 20Hz – 20kHz
    Lo Crossover; 20Hz – 20kHz
    Knee : Hard, Med, Soft
  • Gate / Ducker Threshold; -60 – 0dB
    Attack; 50us – 100ms
    Hold; 2ms – 2s
    Release; 5ms – 5s
    Range; 0 - 90dB
    Key; Any Source
    Key Listen
    Freq/Width; 20 – 20kHz
    Compressor On/Off
    Threshold; -60 – 0dB
    Attack; 500us – 100ms
    Release; 5ms – 5s
    Ratio; 1:1 – 50:1
    Gain; 0 to +40dB
    Link; Any Channel/Buss
    S/C Source : Any source
    S/C Listen : On/Off
    S/C Filter Freq/Width: 20Hz – 20kHz
  • Insert B (Post EQ/Dyn) On/Off
  • Mute Channel Mute
  • Solo Solo Buss 1 / Solo Buss 2 / Both,
  • Channel Safe Mono/Stereo, Bus Mode, Label, Filters, Trim, Delay, Tube, Insert A, EQ, Dyn1, Dyn2, Insert B, Group Assigns, Fade, Mute, Direct Outs,
    Full Safe
  • Output Routing Outputs, Insert A, Insert B
  • Fader 100mm Motorised Fader ∞ to + 10dB

Distribué par apexaudio

»

Autres catégories dans Tables de Mixage

Autres dénominations : s 31