subdirectory_arrow_left subdirectory_arrow_left Distorsions/Overdrives/Fuzz Basse
Matériel Distorsions/Overdrives/Fuzz Basse {{currentManName}}swap_horiz Source Audioswap_horiz Rechercher une marquekeyboard_arrow_down

Source Audio AfterShock Bass Distortion

Fiche technique

  • Fabricant : Source Audio
  • Modèle : AfterShock Bass Distortion
  • Série : One
  • Catégorie : Distorsion/Overdrive/Fuzz Basse
  • Fiche créée le : 26/02/2015
Afficher les caractéristiques


  • Model Number: SA246
  • Bypass: True Bypass or Buffered Bypass
  • Number of Presets: 3
  • Stackable Drive Engines:  Dual drive engines and stereo inputs and outputs make it possible (via the Neuro App) to stack any combination of drive engines in either series or parallel as well as split the signal and send a separate drive engine to each of the pedal’s outputs.
  • Controls:
    • Drive Knob: Controls the amount of gain into the distortion circuit, which sets the amount of  distortion and sustain.
    • Level Knob: Controls the overall output level.
    • Clean Knob: Controls the amount of clean signal in the output.
    • Tone Knob: Controls the tone of the distortion.
    • Effect switch: Tube / Heavy / Fuzz
  • Connectors:
    • Input 1: primary input for guitar, bass, or other instruments. It can also accept line-level inputs.
    • Input 2: audio input or data connection for the Neuro App, or both at the  same time.
    • Output 1: primary output. Connect it to your amplifier, recording interface, or the next device in  your effects signal chain.
    • Output 2: audio output or the daisy-chain data connection for the Neuro App, or both.
    • USB
    • Control Input (3.5 mm): connects to external control devices such as the Dual Expression  Pedal, Reflex Universal Expression Pedal, Neuro Hub, and Hot Hand Motion Controller. 
    • Power: 9V DC
  • Full MIDI capability (and 128 presets) with the Neuro Hub (formerly Soundblox Hub)
  • Power Supply & 1/8” to 1/4” cable for Neuro Mobile App connection included

Technical Data

  • Maximum Input Level: +6 dBV = 8.2 dBu = 2 V RMS = 5.6 V p-p
  • Input Impedance: 1 MegaOhm (1 MΩ)
  • Output Impedance: 600 Ohm (600 Ω)
  • 108 dB DNR Audio Path
  • 24-bit Audio Conversion
  • 56-bit Digital Data Path
  • Power: 9V DC (center negative)
  • Current Draw: 180 mA
  • Dimensions (including knobs): 11.63 x 7.00 x 5.61 cm / 4.58 x 2.75 x 2.21 in
  • Weight: 280 grams / 0.625 pounds


Masquer les caractéristiques


Voir toutes les vidéos Source Audio AfterShock Bass Distortion


Voir toutes les photos Source Audio AfterShock Bass Distortion

Manuels et autres fichiers

Avis utilisateurs


Voir toutes les news Source Audio AfterShock Bass Distortion

Forums Source Audio AfterShock Bass Distortion

Acheter neuf Source Audio AfterShock Bass Distortion

Dernières petites annonces Source Audio AfterShock Bass Distortion

Argus du Source Audio AfterShock Bass Distortion

Les prix indiqués dans les petites annonces des particuliers sur Audiofanzine ne sont pas nécessairement les véritables prix de vente ou d'achat.
Les annonces avec options, ou constituant un pack, ne sont pas prises en compte.
Moyenne des 12 annonces : 114

Distorsions/Overdrives/Fuzz Basse concurrents

Autres Distorsions/Overdrives/Fuzz Basse Source Audio

Autres dénominations : after shock bass distortion, aftershockbassdistortion, sa246, sa-246, after shock