close
subdirectory_arrow_left subdirectory_arrow_left Enceintes de monitoring actives
Matériel Enceintes de monitoring actives {{currentManName}}swap_horiz M-Audioswap_horiz Rechercher une marquekeyboard_arrow_down

M-Audio BX5-D3

Enceinte de monitoring active appartenant à la série M-Audio BX

Fiche technique

  • Fabricant : M-Audio
  • Modèle : BX5-D3
  • Série : BX
  • Catégorie : Enceinte de monitoring active
  • Fiche créée le : 01/06/2017
Afficher les caractéristiques
  • Bi-amplified design with 100 watts (60 LF, 40 HF) for powerful, accurate sound
  • 5” Kevlar low-frequency driver with high-temp voice coil and damped rubber surround
  • 1” natural silk dome tweeter delivers superb transient details
  • New computer-optimized tweeter waveguide for precise imaging
  • Acoustic Space Control to fine-tune low-end response to your room
  • Optimized rear port for extended low-frequency response
  • XLR balanced and 1/4” balanced/unbalanced inputs for connecting audio interfaces, mixers, synthesizers DJ gear, and more
  • Volume control enables you to dial in the perfect monitor playback level
  • Ultra-wide range 52-35kHz frequency response covers full musical spectrum
  • Front panel LED shines brightly when speaker is positioned at ideal monitor angle
TYPE 2-way near-field studio reference monitors
LOW FREQ. DRIVER 5 inch (127mm) Kevlar curved cone with high temperature voice coil and damped rubber surround. Magnetically shielded
HIGH FREQ. DRIVER 1 inch (25mm) magnetically shielded natural silk dome
FREQUENCY RESPONSE 52 Hz – 35 kHz
CROSSOVER FREQUENCY 2.0kHz
LOW FREQ. AMPLIFIER POWER 65W
HIGH FREQ. AMPLIFIER POWER 55W
MAXIMUM PEAK SPL 85mV pink noise input produces 96dBA output SPL at 1
INPUT SENSITIVITY 85mV pink noise input produces 96dBA output SPL at 1
INPUT CONNECTORS 1x XLR balanced input connector 1x TRS balanced/unbalanced input connector
INPUT IMPEDANCE 10kΩ balanced, 20kΩ unbalanced
POLARITY Positive signal at + input produce outward LF cone displacement
PROTECTION RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, external mains fuse
POWER Voltage: 100–120V, 50/60 Hz / 220–240V, 50/60 Hz Consumption: 100W
FUSE 220–240V~ T1AL 250V / 100–120V~ T1.6AL 250V
CABINET Vinyl-laminated high-acoustic-efficiency MDF
DIMENSIONS(WIDTH X DEPTH X HEIGHT) 6.9” x 7.8” x 10” / 176 x 197 x 254 mm
WEIGHT 13.2 lbs, 6.0kg
Masquer les caractéristiques

Photos

Voir toutes les photos M-Audio BX5-D3

Avis utilisateurs

News

Forums M-Audio BX5-D3

Acheter neuf M-Audio BX5-D3

Comparer toutes les offres M-Audio BX5-D3

Dernières petites annonces M-Audio BX5-D3

Argus du M-Audio BX5-D3

Avertissement
Les prix indiqués dans les petites annonces des particuliers sur Audiofanzine ne sont pas nécessairement les véritables prix de vente ou d'achat.
Les annonces avec options, ou constituant un pack, ne sont pas prises en compte.
Moyenne des 13 annonces : 108

Enceintes de monitoring actives concurrents

Autres Enceintes de monitoring actives M-Audio

Autres dénominations : bx5d3, bx 5 d 3