close
subdirectory_arrow_left subdirectory_arrow_left Interfaces audionumériques USB
Matériel Interfaces audionumériques USB {{currentManName}}swap_horiz iConnectivityswap_horiz Rechercher une marquekeyboard_arrow_down

iConnectivity iConnectAUDIO2+

iConnectivity iConnectAUDIO2+
+

Fiche technique

  • Fabricant : iConnectivity
  • Modèle : iConnectAUDIO2+
  • Catégorie : Interface audionumérique USB
  • Fiche créée le : 21/01/2016
Afficher les caractéristiques
  • Multi-host Device ports – use with one computer device plus an iOS device at the same time, or up to two computer devices (Mac/PC) at the same time
  • Audio passThru™ routes audio digitally between computer devices
  • 2 XLR ¼” TRS combo analog inputs, each with individual +48V phantom power toggle and impedance switching
  • 4 ¼” TRS balanced analog outputs
  • ¼” Headphone output with independent mix
  • 1 X 1 MIDI DIN in/out
  • iConfig software (Mac/PC/iOS) makes it simple to set up filtering/routing/mixing/merging scenes – which are also stored in flash memory on the device
  • High-resolution audio - up to 24-bit/96kHz AD/DA conversion
  • USB audio and MIDI Class-Compliant
  • Capacitive touch display and control surface
  • Bus powered
  • Charges an iOS device when used with optional power supply (not included)
Microphone Inputs Line/Instrument Inputs (Balanced) Line/Instrument Inputs (Single Ended Input)
  • Gain: 0- 60 dB (1 dB steps)
  • Frequency Response: 20 Hz - 20kHz
  • SNR: 104dB (1kHz, 1 Vrms, BW: 22Hz-22kHz, A-weighting, Lowest Gain)
  • THD+N: -90 dB (1kHz, 1 Vrms, BW: 22Hz-22kHz, A-weighting, Lowest Gain)
  • Attenuator: 20 dB (fixed)
  • Impedance: 800 kOhms (Hi-Z), 45 kOhms (Lo-Z)
  • SNR: +104 dB (1kHz, 2 Vrms, BW: 22Hz-22kHz, A-weighting)
  • THD+N: -88 dB (1kHz, 2 Vrms, BW: 22Hz-22kHz, A-weighting)
  • Maximum input level: 8 Vrms, 20 dBu, 18 dBV (1kHz, BW: 22Hz-22kHz, A-weighting, 1% THD+N, SNR=116 dB)
  • Attenuator: 20 dB (fixed)
  • Impedance: 800 kOhms (Hi-Z), 45 kOhms (Lo-Z)
  • SNR: +104 dB (1kHz, 2 Vrms, BW: 22Hz-22kHz, A-weighting)
  • THD+N: -88 dB (1kHz, 2 Vrms, BW: 22Hz-22kHz, A-weighting)
  • Maximum input level: 8 Vrms, 20 dBu, 18 dBV (1kHz, BW: 22Hz-22kHz, A-weighting, 1% THD+N, SNR=116 dB)
Line Outputs  Headphone Digital Performance
  • Maximum Output Level: 12 dBu, 9.8 dBV, 3.1 Vrms
  • Frequency Response (flatness): 20 Hz - 20kHz (+/-0.1dB)
  • SNR: +98 dB (1kHz, BW: 22Hz-22kHz, A-weighting)
  • THD+N: -98 dB (1kHz, BW: 22Hz-22kHz, A-weighting) 
  • Frequency Response (flatness): 20 Hz - 20kHz (+/-0.1dB)
  • SNR: +100 dB (1kHz, BW: 22Hz-22kHz, A-weighting)
  • THD+N: -99 dB (1kHz, BW: 22Hz-22kHz, A-weighting)
  • Power output into 30 Ohms per channel: 34 mW per channel
  • 24-bit resolution
  • A-D Dynamic Range:102dB (fs= 48kHz, 20kHz - 20kHz, A-Weighting, 24bit)
  • D-A Dynamic Range:104dB (fs= 44.1kHz, 20kHz - 20kHz, A-Weighting, 24bit)
  • Supported sample rates: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
Masquer les caractéristiques

Vidéo

Photos

Voir toutes les photos iConnectivity iConnectAUDIO2+

News

Forums iConnectivity iConnectAUDIO2+

Acheter neuf iConnectivity iConnectAUDIO2+

Argus du iConnectivity iConnectAUDIO2+

Avertissement
Les prix indiqués dans les petites annonces des particuliers sur Audiofanzine ne sont pas nécessairement les véritables prix de vente ou d'achat.
Les annonces avec options, ou constituant un pack, ne sont pas prises en compte.
Moyenne des 6 annonces : 115

Interfaces audionumériques USB concurrents

Autres Interfaces audionumériques USB iConnectivity

Autres dénominations : i connect audio2, iconnectaudio2, iconnectaudio 2