close
subdirectory_arrow_left subdirectory_arrow_left Samplers et lecteurs d'échantillons virtuels
Matériel Samplers et lecteurs d'échantillons virtuels {{currentManName}}swap_horiz Sample Magicswap_horiz Rechercher une marquekeyboard_arrow_down

Sample Magic Stacker

Sample Magic Stacker
+

Fiche technique

  • Fabricant : Sample Magic
  • Modèle : Stacker
  • Catégorie : Sampler et lecteur d'échantillons virtuel
  • Fiche créée le : 17/05/2016
Afficher les caractéristiques

3 x Sample Layers:

  • Tune / Pan / Loop / Normalise / Reverse
  • Stereo Channel matrix : Normal / channel Swap / Mono Left / Mono Right : Phase Invert / L / R
  • Stereo Width (variable Mid / Side + mono pass)
  • Sample Delay (left / right 0-10,000 samples)
  • Amp Envelope : 8 stage programmable envelope with curve control, time resize and warp (change the time ratio for the start of the envelope only)
  • Pitch Envelope : 8 stage programmable envelope with curve control, time resize and warp (change the time ratio for the start of the envelope only)

1 x Synth layer:

  • Variable Wavetable : Sine / Triangle / Square
  • Tune / Drive / Volume / Click (808 stye)
  • Noise : Colour / Width / Filter (LP/BP/HP) / Rez
  • Noise Envelope : 8 stage programmable envelope with curve control (selectable On/off : when off is selected, Noise is routed to main synth envelope)
  • Amp Envelope : 8 stage programmable envelope with curve control, time resize and warp (change the time ratio for the start of the envelope only). Save/ Load / Randomise Shape.
  • Pitch Envelope : 8 stage programmable envelope with curve control, time resize and warp (change the time ratio for the start of the envelope only)
  • Scale : Hz or Midi Note Pitch.
  • Save/ Load / Randomise Shape.

Insert FX (all layers):

  • Digitze,
  • Clip Filter (LP/BP/HP + 7 distortion types + Pre/Post)
  • Zero Flanger (3 types + LFOP BPM sync and Re-Trig)
  • Mod Shift (Ring Modulator / Frequency Shifter)
  • 2 Band EQ : Selectable Parametric / Hi-Shelf / Low-Shelf + Variable Q
  • Dual Filters : Hi and Lo cut (4 types : 12/24/48/Res)

Send FX: Delay

  • Delay : Mode : Echo / Repeats, Ms / BPM sync, Ping pong width, LPF, Mod rate + Depth. 
  • Pump Envelope : 8 Stage programable envelopes with curve control, BPM sync + Trig/Loop option. Targets : Amp / Low Filter / High Filter
  • 1 Band EQ : Selectable Parametric / Hi-Shelf / Low-Shelf + Variable Q
  • Dual Filters : Hi and Lo cut (4 types : 12/24/48/Res)
 

Send FX: Impulse

  • Impulse : Load any audio file for IR transformation (Reverb / Distortion etc)
  • Pump Envelope : 8 Stage programable envelopes with curve control, BPM sync + Trig/Loop option. Targets : Amp / Low Filter / High Filter
  • 1 Band EQ : Selectable Parametric / Hi-Shelf / Low-Shelf + Variable Q
  • Dual Filters : Hi and Lo cut (4 types : 12/24/48/Res)

Modulation / Routing

  • Modulation Matrix : 9 Modulation slots / 11 sources (4 Mod envelopes / 4 macros / Pitch Bend / Kaoss / Velocity)
  • Selectable Polarity Bi-Uni polar / Depth / On/off.
  • 4x Modulation Envelopes : 8 Stage programable envelopes with curve control, BPM sync + LFO Loop option. Save/ Load / Randomise Shape.
  • 4 Macro controls with Rename

 Scatter:

  • Intelligent d-part sample offset

Global controls:

  • Global Edit : Edit Amp env times, tuning and stereo width for each or all layers via a single fader.
  • Mixer : 6 Channels (4 layers + Delay + Impulse) Mute/Solo / Delay Send / Impulse Send. Master Volume.
  • Scope Output Visualiser and Trigger/Audition.
  • Midi Velocity / Keytrack : independently switchable for all layers
  • Trigger Modes : Envelope (plays sound till envelopes finish), Gate (plays sound only while MIDI note is ON)
  • Polyphony : 16 notes
  • Modes : Mono / Poly

Presets:

  • Core Library :  1208 presets covering Kicks, Snares, HiHats, Cymbals, Percussion, Sub Bass, FX, styles / genres created from over 750 audio files.
  • Preset Browser : Open/ Save /Save As layer, Prev/ Next/ Randomise layer file in folder, browse current folder. Reset Layer to defaults.
  • Randomise - Sample Layer : Load Audio file from Finder, Prev/ Next/ Randomise audio file in folder, browse current folder. Reset Layer to defaults.
  • Randomise - Synth Layer : Open/ Save /Save As layer, Prev/ Next/ Randomise layer file in folder, browse current folder. Reset Layer to defaults.
 VST, AU and AAX
Masquer les caractéristiques

Vidéo

Voir toutes les vidéos Sample Magic Stacker

Photos

News

Voir toutes les news Sample Magic Stacker

Forums Sample Magic Stacker