Sujet Commentaires sur la news : Singular Sound s'apprête à dévoiler un nouveau Looper
- 795 réponses
- 47 participants
- 48 880 vues
- 46 followers
Hushman
5233
Administrateur·trice du site
Premier post
1 Posté le 27/06/2019 à 10:41:18Commentaires sur la news : Singular Sound s'apprête à dévoiler un nouveau Looper
L'Aeros Loop Studio de Singular Sound sur le point d'être dévoilé.
Lire la news
Ce thread a été créé automatiquement suite à la publication d'une news pour ce produit. N'hésitez pas à poster vos commentaires ici !
Lire la news
Ce thread a été créé automatiquement suite à la publication d'une news pour ce produit. N'hésitez pas à poster vos commentaires ici !
Hushman
Suivez moi sur Instagram : @hushman_audiofanzine
Juliacry
363
Posteur·euse AFfamé·e
531 Posté le 07/05/2020 à 20:20:57
Elle a l'air pas mal complète! mais toujours rien sur cette fameuse sortie Exp :/
thovy64
541
Posteur·euse AFfolé·e
532 Posté le 07/05/2020 à 22:56:38
Je vous laisse me raconter parce que du coup...j’enrage de pas pouvoir la tester !
thovy64
541
Posteur·euse AFfolé·e
533 Posté le 22/06/2020 à 23:36:14
Nouveau firmware 3.1.3
https://forum.singularsound.com/t/aeros-firmware-3-1-x/19706
https://forum.singularsound.com/t/aeros-firmware-3-1-x/19706
Pretextat
11951
Drogué·e à l’AFéine
534 Posté le 23/06/2020 à 16:19:43
Merci !
sonicsnap
75846
AF, je suis ton père
535 Posté le 23/06/2020 à 16:25:45
Pretextat
11951
Drogué·e à l’AFéine
536 Posté le 23/06/2020 à 18:09:30
Firmware 3.1.3 Changelog
Added MIDI command responsiveness for compatibility with MIDI Maestro Aeros Mode (see below for full list of supported MIDI commands)
Added MIDI IN/OUT Channel Select setting
All track actions are now on down press of the button for more accuracy. This includes, record, re-record (on an undone track), overdub, play, mute, cancel mute, unmute, cancel unmute.
Made Next Part command (lower left button) on press (not release) while recording for more precise recording in freeform with 2x2 mode
Added Main Setting: Track Action button RPO/ROP. This allows the track action sequence to either be Record/Play/Overdub (default) or Record/Overdub/Play which is useful for soundscape artists to capture the ‘tails’ of loops by going directly into overdub after recording.
Base track for Sync Length setting is now the shortest track in the song part instead of the longest in freeform mode for additional flexibility
Added system to limit audio by hard clipping when merging audio to prevent distortion
Fixes
Allow saving settings from song edit screen
Fixed move song to SD crash. Prevent moving of currently loaded song.
Fixed not having clicks in count-in when Aeros is a slave
Fixed sync start setting following undone track when it is the only track in the song part. Now a new sync start point will be set when redoing the only track.
Removed extra midi tick when starting the looper which was throwing off the sync with certain time signatures
What we are working on next:
Locked tracks feature (keep some tracks playing while song parts change)
Auto Quantize (Record first track in song part in Freeform and Aeros quantizes it)
Hands free song navigation system
Aeros as Master MIDI OUT commands
Fade Out/In Audio for mute/unmute and Stop option
Input signal level control
Pan audio in mixer
Import backing track support
Additional MIDI command responsiveness (TBD)
Current List of Supported MIDI IN commands:
Sysex: Start/Stop (implemented immediately upon receiving the command)
MIDI Clock: AEROS may take a few seconds to adjust to an incoming MIDI clock signal when starting a new song
Time Signature: This is sent by BeatBuddy whenever a song is loaded as a Sys-ex midi message.
(All values in hex)
(2/4) ---- F0 7F 7F 03 02 04 02 02 18 08 F7
(3/4) ---- F0 7F 7F 03 02 04 03 02 18 08 F7
(4/4) ---- F0 7F 7F 03 02 04 04 02 18 08 F7
(6/8) ---- F0 7F 7F 03 02 06 03 02 18 08 F7
(The above are given as examples. All time signatures are supported)
Save Song - CC:33, value 0
Saves the song from the Loop Studio Screen or the Song Settings Menu.
New 2x2/6x6 Song - CC:34
Value 0: Starts a new 2x2 song (same settings as previously loaded 2x2 song) and enters the Loop Studio.
Value 1: Starts a new 6x6 song (same settings as previously loaded 6x6 song) and enters the Loop Studio
Songs List/Loop Studio - CC:35
Value 0: Goes to Songs List
Value 1: Goes to Loop Studio screen (if already in Loop Studio screen, is ignored)
Scroll Up/Down (Songs List) - CC:36
Value 0: Scroll down list (songs list, or otherwise if relevant)
Value 1: Scroll up list (songs list, or otherwise if relevant)
Value 2: Select (currently highlighted item in song list)
Undo/Redo (1 layer) - CC:37
Value 0: Undo/Redo currently selected track (6x6 mode)
Value 1-6: Undo/Redo track (track # = value #)
Mute - CC:38
Value 1-6: Mutes/Unmutes track (track # = value #)
Value 0 - Mutes all tracks
Value 127 - Unmutes all tracks
Solo and Stop - CC:39
Value 1-6 - Solos track (track # = value #). This behaves like a XOR solo function, only one track can be soloed at a time in a given song part.
Value 127 - Un-solos track, this unmutes all other tracks in song part.
Value 0: Stop all playback immediately
Record New Part - CC:40, value 0
Record new song part
Record New Track - CC:41, value 0
Record new track
Next Part - CC:102, value 0-127
Changes song parts in 2x2 immediately. In 6x6, it will change song parts if a different song part than the one currently playing is selected. Please note: This command overrides the ‘Change Parts: End of Loop’ setting.
Change Parts - CC:113
Value 1-6 - Begin the transition to part (Part # = value #) according to the Change Part setting (Immediately/End of Measure/End of Loop). CC:102 will make this song part change immediate. If the part doesn’t exist in the song, the AEROS will ignore the command.
Value 101-106 - Begin the transition to part (part # = value # minus 100 so value 102 is part 2), according to the Change Part setting (Immediately/End of Measure/End of Loop). If the part doesn’t exist in the song, the AEROS will ignore the command. This allows you to send a single on-press command for changing parts. This also allows you to switch the part on the Aeros without switching parts on the BeatBuddy (which ignores values 101-106).
Screenshot - CC:127, value 127 will save a screenshot of the current AEROS screen to the SD card. Note: Must have SD card inserted in Aeros
Added MIDI command responsiveness for compatibility with MIDI Maestro Aeros Mode (see below for full list of supported MIDI commands)
Added MIDI IN/OUT Channel Select setting
All track actions are now on down press of the button for more accuracy. This includes, record, re-record (on an undone track), overdub, play, mute, cancel mute, unmute, cancel unmute.
Made Next Part command (lower left button) on press (not release) while recording for more precise recording in freeform with 2x2 mode
Added Main Setting: Track Action button RPO/ROP. This allows the track action sequence to either be Record/Play/Overdub (default) or Record/Overdub/Play which is useful for soundscape artists to capture the ‘tails’ of loops by going directly into overdub after recording.
Base track for Sync Length setting is now the shortest track in the song part instead of the longest in freeform mode for additional flexibility
Added system to limit audio by hard clipping when merging audio to prevent distortion
Fixes
Allow saving settings from song edit screen
Fixed move song to SD crash. Prevent moving of currently loaded song.
Fixed not having clicks in count-in when Aeros is a slave
Fixed sync start setting following undone track when it is the only track in the song part. Now a new sync start point will be set when redoing the only track.
Removed extra midi tick when starting the looper which was throwing off the sync with certain time signatures
What we are working on next:
Locked tracks feature (keep some tracks playing while song parts change)
Auto Quantize (Record first track in song part in Freeform and Aeros quantizes it)
Hands free song navigation system
Aeros as Master MIDI OUT commands
Fade Out/In Audio for mute/unmute and Stop option
Input signal level control
Pan audio in mixer
Import backing track support
Additional MIDI command responsiveness (TBD)
Current List of Supported MIDI IN commands:
Sysex: Start/Stop (implemented immediately upon receiving the command)
MIDI Clock: AEROS may take a few seconds to adjust to an incoming MIDI clock signal when starting a new song
Time Signature: This is sent by BeatBuddy whenever a song is loaded as a Sys-ex midi message.
(All values in hex)
(2/4) ---- F0 7F 7F 03 02 04 02 02 18 08 F7
(3/4) ---- F0 7F 7F 03 02 04 03 02 18 08 F7
(4/4) ---- F0 7F 7F 03 02 04 04 02 18 08 F7
(6/8) ---- F0 7F 7F 03 02 06 03 02 18 08 F7
(The above are given as examples. All time signatures are supported)
Save Song - CC:33, value 0
Saves the song from the Loop Studio Screen or the Song Settings Menu.
New 2x2/6x6 Song - CC:34
Value 0: Starts a new 2x2 song (same settings as previously loaded 2x2 song) and enters the Loop Studio.
Value 1: Starts a new 6x6 song (same settings as previously loaded 6x6 song) and enters the Loop Studio
Songs List/Loop Studio - CC:35
Value 0: Goes to Songs List
Value 1: Goes to Loop Studio screen (if already in Loop Studio screen, is ignored)
Scroll Up/Down (Songs List) - CC:36
Value 0: Scroll down list (songs list, or otherwise if relevant)
Value 1: Scroll up list (songs list, or otherwise if relevant)
Value 2: Select (currently highlighted item in song list)
Undo/Redo (1 layer) - CC:37
Value 0: Undo/Redo currently selected track (6x6 mode)
Value 1-6: Undo/Redo track (track # = value #)
Mute - CC:38
Value 1-6: Mutes/Unmutes track (track # = value #)
Value 0 - Mutes all tracks
Value 127 - Unmutes all tracks
Solo and Stop - CC:39
Value 1-6 - Solos track (track # = value #). This behaves like a XOR solo function, only one track can be soloed at a time in a given song part.
Value 127 - Un-solos track, this unmutes all other tracks in song part.
Value 0: Stop all playback immediately
Record New Part - CC:40, value 0
Record new song part
Record New Track - CC:41, value 0
Record new track
Next Part - CC:102, value 0-127
Changes song parts in 2x2 immediately. In 6x6, it will change song parts if a different song part than the one currently playing is selected. Please note: This command overrides the ‘Change Parts: End of Loop’ setting.
Change Parts - CC:113
Value 1-6 - Begin the transition to part (Part # = value #) according to the Change Part setting (Immediately/End of Measure/End of Loop). CC:102 will make this song part change immediate. If the part doesn’t exist in the song, the AEROS will ignore the command.
Value 101-106 - Begin the transition to part (part # = value # minus 100 so value 102 is part 2), according to the Change Part setting (Immediately/End of Measure/End of Loop). If the part doesn’t exist in the song, the AEROS will ignore the command. This allows you to send a single on-press command for changing parts. This also allows you to switch the part on the Aeros without switching parts on the BeatBuddy (which ignores values 101-106).
Screenshot - CC:127, value 127 will save a screenshot of the current AEROS screen to the SD card. Note: Must have SD card inserted in Aeros
sonicsnap
75846
AF, je suis ton père
537 Posté le 23/06/2020 à 18:19:37
thovy64
541
Posteur·euse AFfolé·e
538 Posté le 19/08/2020 à 10:09:54
Nouveau firmware 3.1.10
https://forum.singularsound.com/t/aeros-firmware-3-1-x/19706
https://forum.singularsound.com/t/aeros-firmware-3-1-x/19706
NIGHTER-BEATS
84
Posteur·euse AFfranchi·e
539 Posté le 19/08/2020 à 11:55:43
Citation de thovy64 :
Nouveau firmware 3.1.10
https://forum.singularsound.com/t/aeros-firmware-3-1-x/19706
Merci!
- < Liste des sujets
- Charte