Line Audio 2MP

• Fabricant : Line Audio
• Modèle : 2MP
• Catégorie : Préamplis à transistors
• Fiche créée le : 22/04/2011

• Power requirement: 15-18VAC 7-20VA (2MP) 15-20VA (8MP), 50-60Hz. External 230VAC transformer included (120VAC on special request)
• Frequency response: 5Hz - 100 KHz +-0.5dB (2Hz - 200KHz -3dB)
• Gain: 60dB with balanced output. (with unbalanced output 54dB). The gain of the input stage has two fixed settings giving max 60dB or 40dB gain.
• Harmonic distortion: 0.002% at -6dB below max level, at full gain of input stage. 0.005% at -3dB below max level, at full gain of input stage
• Highpass filter: 100Hz, 12dB/oct switchable. Other frequency on special request
• Inputs: Electronically balanced 
• Input impedance: >10Kohm 
• Input level: max 3.2V RMS / 320 mVRMS (-20dBPAD / no PAD)
• Input noise level: -128 dBU/dBm (100ohm termination, 20-20KHz B/W) -133 dBV (input shorted)
• Phantom power: +48V through fed through 2 x 6.8 Kohm resistors 
• Phantom current: 10mA per channel, all channels loaded
• Outputs: Electronically balanced.
• Output impedance: 300 ohm (150ohm+150ohm)
• Output level: max 15V RMS 
• Output DC offset: max 1mV at 40dB gain, max 10mV at 60dBgain 
• XLR Polarity: Pin 1 ground, pin 2 positive, pin 3 negative. 
• For unbalanced output: use pin2 for signal and pin1 for signal ground (pin 3 ahould be left unconnected).
• Size 2MP: 173 mm (W), 44 mm (H), 158mm (D).

Distribué par Audioware