subdirectory_arrow_left subdirectory_arrow_left Synthétiseurs analogiques en rack
Matériel Synthétiseurs analogiques en rack {{currentManName}}swap_horiz Moog Musicswap_horiz Rechercher une marquekeyboard_arrow_down

Moog Music Mother 32

Fiche technique

  • Fabricant : Moog Music
  • Modèle : Mother 32
  • Catégorie : Synthétiseur analogique en rack
  • Fiche créée le : 01/10/2015
Afficher les caractéristiques

• Semi-Modular design requires no patching for swift, inspired music creation

• Voltage Controlled 32 Step Sequencer with 64 Sequence Locations

• Low Pass & High Pass Moog Ladder Filter (20Hz–20KHz) with voltage controlled resonance

• External audio input for processing outside sound sources
• Definitive Moog oscillator with Pulse and Sawtooth wave outputs • 5-pin MIDI input and MIDI to CV converter
• 32 Modular Patch Points (Includes 5 patch cables)
• 2 Voltage controlled mixers

• Superb companion to Werkstatt 01, Minitaur and other synthesizers • Main module can be easily transferred into a Eurorack skiff or case • Mount 2 or 3 units vertically with optional 2 and 3 Tier kits
• Complete solution for new Eurorack users – no other items required


  • Single VCO with simultaneous Sawtooth and Pulse wave Outputs (+/- 5V)

  • 1 V/Octave from 8Hz to 8KHz (16KHz max with LFO/CV)

  • Panel Frequency control (+/-1 Octave)

  • Toggle Selector for waveform routed to the mixer

  • Pulse Width control

  • Linear FM and 1V/Octave Exponential FM inputs (+/-5V) NOISE

  • Output normalled to Ext Audio input

  • White Noise output (+/-5V)


  • Crossfades between selected VCO waveform and Ext Audio input (normalled to White Noise)


  • 20Hz to 20KHz switchable Low Pass/High Pass 4-pole Transistor Ladder Filter with voltage controlled Resonance

  • VCF Cutoff input (+/-5V)

  • VCF Resonance input (+/-5V)

  • VCF Output (+/-5V)


  • Selectable CV Source: EG or ON (drone)

  • VCA CV input (0 to +8V in EG mode and +/-5V in ON mode,

summed with signals from ON/EG switch)

  • Output Volume Control (VCA Out and Line/Headphone Out)

  • VCA output (+/-5V) and rear panel 1/4" Headphone/Audio Output

    (+/-1.7V peak)


  • Square wave output (+/-5V)

  • Triangle wave output (+/-5V)

  • Selectable waveshape to VCO and VCF MOD sections

  • Panel Rate control .1Hz to 350Hz (600Hz max)

  • LFO Rate CV input (+/-5V)


  • Variable controls for Attack and Decay

  • Sustain ON/OFF for single-trigger (ASD) or multi-trigger (AD)


  • External Gate input (0 to +5V; Tolerant of 10V gates)

  • EG output (0 to +7.5V)


  • Selectable Source: EG/VCO MOD or LFO (EG normalled to VCO MOD in)

  • VCO Mod input (normalled to EG/VCO MOD switch position)

  • Variable Modulation Amount control

  • Selectable Modulation Destination: VCO Pitch or PWM (PWM

    summed with Pulse Width panel control)


  • Selectable Source: EG or LFO

  • Variable Modulation Amount control

  • Selectable VCF Modulation Polarity (+/-)


  • Voltage controlled crossfade/mix circuit for mixing two DC coupled signals

  • Mix 1 Input (Normalled to ground)

  • Mix 2 Input (Normalled to +5V)

  • Mix Control CV input (-5V to +5V)

  • Mix Output: Un-inverted output (-5 to +5V)


  • 1x input 2x output signal multiplier

  • Mult Input: Buffered signal

  • Mult Outputs: 1 and 2


  • Single octave 13-note keyboard (In Step Edit Mode this is used to select, mute and enable sequencer steps.)

  • Octave Up/Down buttons select from 8 available octave settings

  • Glide Time control

  • KB CV output (-5 to +5V)

  • Gate Output (0 to +5V)


  • Dual-mode 32 step sequencer with 64 sequence locations

  • Performance Modes:

    • -  In KB Mode, the Keyboard is used to play the instrument, enter sequence data and transpose sequences.

    • -  In Step Mode, the keyboard functions as the step sequencer interface and is used to enable and mute steps, update note data and select sequence banks.

  • Each sequence step includes: Note Value, Gate Length (Tie), Rest On/Off, Accent On/Off, Glide On/Off and Ratchet count (up to 4 note-repeats occurring in the duration of a single note)

  • Sequencer Panel Controls: Tempo, Swing, Run/Stop, Hold, and Reset

  • Sequencer Control Inputs: Tempo, Run/Stop (also used for sync),

    Reset and Hold

  • Sequencer Control Outputs: KB, Gate, Accent Pulse


• The patchbay contains 32 patch points (3.5mm)

  • Available Inputs: External Audio, Mix CV, VCA CV, VCF Cutoff, VCF Resonance, VCO 1V/Octave, VCO Linear FM, VCO Modulation, LFO Rate, Mix 1, Mix 2, VC Mix Control, Mult, Gate, Tempo, Run/Stop, Reset and Hold

  • Available Outputs: VCA, Noise, VCF, VCO Saw, VCO Pulse, LFO Triangle, LFO Square, VC Mix, Mult 1, Mult 2, Assign, EG, KB, Gate


• Multipurpose control output for selecting from 16 available functions: Sequencer Accent, Sequencer Clock, Sequencer Clock /2 Sequencer Clock /4, Decimated "Ramp”, Decimated "Saw”, Decimated "Triangle”, Stepped Random, STEP 1, MIDI Note On Velocity, MIDI Channel Aftertouch, MIDI Pitch Bend, MIDI CC1 Mod Wheel, MIDI CC2, MIDI CC4 and MIDI CC7


  • Dimensions: 12.57“W x 4.21“H (with knobs) x 5.24“D

  • Weight: 3.5 lbs.

  • Power Consumption: 2.8W

  • Included Power Supply: 100-250VAC, 50-60Hz, +12VDC 1A

  • Patchbay: 32x 3.5mm jacks

  • Rear Panel Audio Out: 1⁄4” Headphone / Audio


    • Current Draw: 230mA (10-pin header)

    • Mounting Dims: 60HP (.69” 26mm Module Depth)


      2 Tier Rack Kit

      Mount 2 Mother-32 synthesizers together vertically for increased modularity and synthesis capabilities.

• P/N: KIT-RM-0201

3 Tier Rack Kit

Mount 3 Mother-32 synthesizers together vertically for maximum modularity and synthesis capabilities

• P/N: KIT-RM-0301

6” Patch Cable Set

5 high quality Moog modular patch cables for use with Mother-32 and all 3.5mm equipped instruments


12” Patch Cable Set

5 high quality Moog modular patch cables for use with Mother-32 and all 3.5mm equipped instruments

• P/N: ACC-CABLE-SET-3 Replacement Power Supply

Backup power supply (highly recommended for touring musicians) • P/N: TRN-01-000-0016

Empty Moog 60HP Case

60HP extruded aluminum Eurorack case with wood sides (requires separate Eurorack power module). Up to 1.9” module depth

• P/N: TRN-01-000-0016

Mother 32 Travel Bag

Premium quality, USA artisan hand-sewn carrying case custom made for Mother-32.

Masquer les caractéristiques


Voir toutes les vidéos Moog Music Mother 32


Voir toutes les photos Moog Music Mother 32

Manuels et autres fichiers

Avis utilisateurs

Voir tous les avis Moog Music Mother 32


Voir toutes les news Moog Music Mother 32

Tutoriels et astuces

Forums Moog Music Mother 32

Voir tous les forums Moog Music Mother 32

Acheter neuf Moog Music Mother 32

Comparer toutes les offres Moog Music Mother 32

Dernières petites annonces Moog Music Mother 32

Voir toutes les annonces Moog Music Mother 32

Argus du Moog Music Mother 32

Les prix indiqués dans les petites annonces des particuliers sur Audiofanzine ne sont pas nécessairement les véritables prix de vente ou d'achat.
Les annonces avec options, ou constituant un pack, ne sont pas prises en compte.
Moyenne des 262 annonces : 455
Moyenne des 47 annonces : 424
Moyenne des prix indiqués dans toutes les annonces : 450 €

Annonces des 12 derniers mois :
  • 82 annonces de vente : 428 €
  • 10 annonces d'achat : 363 €
Moyenne des 42 prix réels de vente déclarés après transaction : 416 €**

Argus Audiofanzine : 414 €*
* L’argus affiché par AudioFanzine est calculé en fonction de l’offre et de la demande, ce qui explique que sa valeur soit différente de la moyenne des annonces.

** Prix correspondant aux achats effectués ces 12 derniers mois uniquement.

Cet argus vous semble erroné ? Merci de le signaler ici.

Synthétiseurs analogiques en rack concurrents

Autres Synthétiseurs analogiques en rack Moog Music

Autres dénominations : mother32