Se connecter
Se connecter

ou
Créer un compte

ou
Ajouter ce produit à
  • Mon ancien matos
  • Mon matos actuel
  • Mon futur matos
Ashdown Klystron 500 Head
Photos
1/83

Ashdown Klystron 500 Head

Tête d'ampli Basse de la marque Ashdown appartenant à la série Klystron

3 avis

Annonces Klystron 500 Head

Alerte nouvelle annonce

News

Images

Vidéos

Avis

4.5/5
(3 avis)
33 %
(1 avis)
33 %
(1 avis)
Donner un avis
Anonyme

un super ampli basse

Ashdown Klystron 500 HeadPublié le 09/03/13 à 17:11
ampli basse 500w

UTILISATION

ouai ça sonne direct

SONORITÉS

du punk au blues

AVIS GLOBAL

franchement, à 1500€ (sur nuostore) le ASHDOWN KLYSTRON EVO 3 C115-500 575w est probablement le meilleur ampli basse sur le marché en 500w à ce prix

je joue du blues, du punk et un pote l'a testé en jazz... et ça passe!!!

incroyable le son chaud de cet ampli

prévoir quelques bières pour rentrer de la répet pour pas être trop essoufflé sur le retour car ça pèse son poids le bestiau …
Lire la suite
ampli basse 500w

UTILISATION

ouai ça sonne direct

SONORITÉS

du punk au blues

AVIS GLOBAL

franchement, à 1500€ (sur nuostore) le ASHDOWN KLYSTRON EVO 3 C115-500 575w est probablement le meilleur ampli basse sur le marché en 500w à ce prix

je joue du blues, du punk et un pote l'a testé en jazz... et ça passe!!!

incroyable le son chaud de cet ampli

prévoir quelques bières pour rentrer de la répet pour pas être trop essoufflé sur le retour car ça pèse son poids le bestiau
Lire moins
»
sadcandlelightsadcandlelight

Ashdown Klystron 500 HeadPublié le 17/10/08 à 13:02
Spécifications du site Ashdown:

Power Output (RMS) 575W
Frequency Response -3dB at 17Hz and 30kHz
Speaker Outputs Minimum impedance 4 Ohms
High Instrument Input Impedance 3.9m Ohms, input range 150mV - 20V p-p
Low Instrument Input Impedance 10k Ohms, input range 300mV - 40V p-p
Line Input Impedance 22k Ohms, input level 0dBu nominal
Line Output Impedance 10k Ohms, level 0dBu nominal
DI Output 600 ohms balanced, level -20dBu nominal
Tuner Output Impedance 1k Ohms, level 0dBu nominal
EQ Bass +/-15dB @ 45Hz
Middle +/-15dB @ 660Hz
Treble +/-15dB @ 7kHz shelving
Slider 1 +/-15dB @ 110Hz
Slider 2 +/-15dB @ 340Hz
Slider 3 +/-15dB @ 1.3kHz
Slider 4 +/-15dB @ 2.6kHz
...…
Lire la suite
Spécifications du site Ashdown:

Power Output (RMS) 575W
Frequency Response -3dB at 17Hz and 30kHz
Speaker Outputs Minimum impedance 4 Ohms
High Instrument Input Impedance 3.9m Ohms, input range 150mV - 20V p-p
Low Instrument Input Impedance 10k Ohms, input range 300mV - 40V p-p
Line Input Impedance 22k Ohms, input level 0dBu nominal
Line Output Impedance 10k Ohms, level 0dBu nominal
DI Output 600 ohms balanced, level -20dBu nominal
Tuner Output Impedance 1k Ohms, level 0dBu nominal
EQ Bass +/-15dB @ 45Hz
Middle +/-15dB @ 660Hz
Treble +/-15dB @ 7kHz shelving
Slider 1 +/-15dB @ 110Hz
Slider 2 +/-15dB @ 340Hz
Slider 3 +/-15dB @ 1.3kHz
Slider 4 +/-15dB @ 2.6kHz
Shape (Push Flat) +8dB @ 50Hz & 4kHz, -8dB @ 400Hz, filter slope - 6dB/octave

Effects Send Impedance 22k Ohms, level 0dBu nominal
Effects Return Impedance 22k Ohms, input level 0dBu nominal
H x W x D (mm) 310 x 470 x 240
Weight (kg) 16

UTILISATION

Elle reprend les caractéristiques des têtes de la serie ABM donc de nombreux réglages possibles.
Il faut prendre quelques minutes pour prendre ses marques, trouver l'utilité de chaque boutons.
Pas de manuel fournis mais on peut le télécharger sur le site de la marque.
Les branchements sont bien conçus: deux branchements speakon/jack pour les baffles.

Le plus de cette tête c'est son look. Un pure merveille, relativement compact et le vu mètre qui s'alume avec la tête ça fait trémousser le poil dans le slip.

Assez puissante pour les répetes et les concerts, pas besoin d'être repiqué pour les salles de 200 personnes max.

Après un an d'utilisation... toujours aussi satisfait de la qualité de cette tête. Tous les réglages sont vraiment bien conçus et on peut facilement chopper un son de malade.
On répète dans un groupement de salles et nombreux sont les bassistes qui me disent que j'ai un super son. Le footswitch fournis avec permet d'activer le compresseur, l'octaveur, la drive et l'équalisation.

SONORITÉS

Je l'utilise principalement pour du rock. Il n'y a qu'à écouter With or without you de U2 pour imaginer le son qui sort de cette tête.
Le valve drive intégré et très très aprécié. Il procure une overdrive très chaude.
Un autre effet intégré c'est le sub-harmonics, il balance des graves en plus. C'est super simpa quand on monte dans les aigus. Fini la basse criarde sur les deux premières cordes.
Du son claquant au son rond et gras cette tête vous offriera tous les sons que vous recherchez.

Je confirme mes propos après un an. Cette tête est vraiment polyvalente et offre la qualité d'une tête à lampe.

AVIS GLOBAL

Voila plusieurs mois que je l'utilise. Cette tête est vraiment un pure merveille. A chaque concert on me dit que j'ai un son de basse sublime, les ingé son kiff eux aussi car elle est très facile à repiquer (D.I. en façade, line out en back).
Ashdown est une marque encore peu connue mais cela ne saurait durer avec du matos de cette qualité avec des prix bien inférieurs à la concurence.
Le point négatif c'est son prix, je l'ai commandé directement d'angleterre pour 870€ port inclus comparé au 1500€ en france. Malheuresement vous avez été nombreux à me demander le site ou je l'ai acheté et ils ne la proposent plus je ne sais pour quelle raison, mais je pense qu'en fouillant un peu on aura pas de mal à avoisiner ce prix. 
Après un an je referais ce choix sans hésiter!
Lire moins
»
iamqmaniamqman

Meilleure période de tonalité graves!

Ashdown Klystron 500 HeadPublié le 18/03/11 à 19:30
contenu en anglais (contenu en anglais)
I want to say there were less than 100 or 200 of these things made. I believe John Entwistle from The Who collaborated with Ashdown to design this preamp befor he died. My band picked one of these up a few years ago by trading some gear. I wish that Ashdown would bring back a reissue of this pre with the ABM 1000. We had this combo pared with an 8x12 Ampeg cab. The bass tone we got with this preamp was so full and filling in the room, and recording with it was a pleasure. The thing had an FET circuit that gave such a warmth to the tone that GK or Ampeg could never even match.

UTILIZATION

We had to play around with it a little bit to find the sweet spot. This was our first Ashdown product so the unfamiliarity factor was apparent. I think it took us some trial and error but eventually we found a good tone for the guitar and cab we were using. Since then we have changed things around but I remember most of the dials were set around noonish. The preamp was constructed to stay around the mid point and dial in the EQ with just very little shifting of the knobs. I used more of the Valve drive knob and the Sub harmonic to really tailor the tone. These two features are fantastic! Being able to dial in a little grind to bass while adding sub octave chorus to the tone was amazing. To this day I haven't played a better bass head or preamp that could match up to this tone. John was a tone purist...just look at his ugly bass guitar condor bird he built for himself. He said it looked ugly but had a tone no other guitar could match and this preamp follows that same approach to music. Although this unit was nice to look at.

We didn't get a manual since we got it on the used market but Ashdown does have a manual available on their website if you get the pleasure of finding one of these pre's.

SOUNDS

The tone was remarkable! Just pure bliss, which makes listening to the bass a little pleasurable. I usually ran the Valve and Sub around 2:00 and I enjoyed having these two knobs follow each other since they blended so well. The compression we used sparingly since I found that it doesn't allow the bass to bloom as much but gave a little more bottom end. So this knob was just barely engaged.

We used this with a Rickenbacker 4003 and a ABM1000 power amp. We had some trouble with the power amp but luckily we had a spare. We had a solid rock/metal bass tone that fit in with just about any band situation...other than jazz fusion.

Since they only built a hand full of these things not many people are even going to play them. However. Ashdown brought back the Klystron in a head form a few years ago and to which they discontinued that as well. However, you can still find some around on ebay and such. Now I believe the new EVO lll's are the new recreation of the Klystron. It seems to have the exact same features and sound.

OVERALL OPINION

There isn't anything to say negatively about this preamp. It was the perfect unit to get blooming, punchy, and responsive bass tone. It was warm and smooth while staying very tight and driving. So many professionals turn to Ashdown for their bass needs and this preamp to me is the best they ever did.

I would recommend trying to find this preamp if you can because it could be a collectors item at some point. If you need something right now then I would look at new EVO lll.
»

Fiche technique

  • Fabricant : Ashdown
  • Modèle : Klystron 500 Head
  • Série : Klystron
  • Catégorie : Têtes d'amplis Basse
  • Fiche créée le : 11/10/2007

Attention c'est le modèle WIDE (c.à.d.le plus large)

Pub : La prestigieuse marque anglaise d'amplification ASHDOWN annonce le lancement de son nouveau vaisseau amiral - la Klystron Serie, nouvelle gamme "Classic" à l'intention des bassistes exigeants et un tantinet fortunés. Derrière ce nom très Sci-Fi se cache une ligne impressionnante d'amplificateurs pour basse électrique.

 La série comporte des caractéristiques communes : •Conçues et construites au Royaume-Uni

• Très forte puissance et plage dynamique très élevée

• Egalisation complexe type Shelving avec filtrage connexe

• Compresseur analogique dual-band (basses et hautes fréquences)

• Générateur de sub-harmoniques

• Double préampli analogique sélectionnable : Solid State (transistors) ou Double Triodes (lampes)

 

Spécifications techniques :

 - Puissance RMS : 575 Watts  - Entrée instrument, sélecteur H (passif)/ B (actif) impédance  - Mixage préampli à transistors (drive) et à tubes (valve)  - EQ 7 bandes         3 potentiomètres rotatifs de +/- 20 dB                          60 Hz(graves),                         660 Hz(medium)                          5 kHz(aigus)         4 potentiomètres linéaires de +/-15dB                         180 Hz                         340 Hz                        1,3 kHz                        2,6 KHz, - position "Flat" - Compresseur à 2 bandes intégré - Générateur d'harmoniques sub-basses, réglable - Volume sortie - sélecteur "MUTE" - Sorties : D.I symétrique (sélectable Pré/Post EQ),             SUB-bass             Ligne/Accordeur             Entrée Ligne stéréo - Connexion pour footswitch - Dimensions : 340mm x 610mm x 240mm - Poids : 16 Kg  - Série : Classic - Modèle : Wide - Autre nom : Ashdown KLY 500

Distribué par Filling Distribution

»

Autres catégories dans Amplis Basse

Autres dénominations : klystron500head, klystron500 head, klystron 500head, klystron575wide, klystron575 wide, klystron 575wide