Se connecter
Se connecter

ou
Créer un compte

ou
Agrandir
Ajouter ce produit à
  • Mon ancien matos
  • Mon matos actuel
  • Mon futur matos
Waldorf Q
Photos
1/132
Waldorf Q

Clavier synthétiseur numérique à modélisation analogique de la marque Waldorf appartenant à la série Q

Sujet WALDORF Q HS......

  • 9 réponses
  • 4 participants
  • 1 480 vues
  • 4 followers
1 WALDORF Q HS......
Bonjour,

Après avoir posé des côtés en bois tout neuf à mon WQ,il a décidé de rendre l'âme.:furieux:

Tout fonctionnait nickel,j'éteinds le Q pour faire une petite pause et à l'allumage il m'a marqué sur l'écran : "DSP ERROR.....RAM":(((

Je suis abattu,savez vous de quoi celà peut il venir ?:((

[ Dernière édition du message le 06/10/2013 à 20:46:15 ]

2
Une mine de renseignements pour les possesseurs de Waldorf, n'hésite pas à y présenter ton problème

http://faq.waldorfian.info/faq-browse.php?product=q#49

Q: How to enter the factory test mode?

A: Power the Q with both Osc and Mixer Edit buttons pressed.
You exit this mode by pulling the Q's main plug.

BE CAREFULL: YOU MIGHT LOOSE SOUNDS OR NEEDED DATA IF YOU DON'T KNOW WHAT YOU ARE DOING IN THIS MODE. ^

Q: How to get into the Q's factory test, service, erease data mode?

A: Power up holding these buttons will get your Waldorf into this mode:

Osc-Edit + Mixer-Edit = factory test
Shift = Init AFM Data (Q+ only!)
Global = Service Mode
Multi = Erase Data Flash
Multimode+Peek = Send OS

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Only do this if you know what you do!
You will loose all your sounds!
You might break your synth doing so!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ^

Tu peux aussi demander à Marzac @ Waldorf si il peut t'aider:

https://fr.audiofanzine.com/membres/429606/

Le plus majestueux des chênes n'était autrefois rien d'autre qu'un pauvre gland...

 

transmission-soundcloud

 

3
Pour info,

un ami électronicien qui répare les synthés m'a dit qu’apparemment ce serait la mémoire RAM qui a cramée,c'est une mémoire qui serait programmé d'usine.

Je pense que cela doit coûter la peau des meules:furieux:,alors le Q restera quand même en déco dans mon studio.....
Mais je le pleure déjà......:(((

Ou alors j'attends d'avoir des sous de côté pour le réparer si c'est faisable::???:

[ Dernière édition du message le 07/10/2013 à 18:54:14 ]

4
Moi j'ai aussi eu un gros problème... mais avec un Micro Q Phoenix Edition (acheté 320€)... Il était magnifique, le son un régal, mais du jour au lendemain il n'a plus fonctionné et ce deux mois après l'avoir acheté.. :(((

Lorsque je l'allumais, l'écran se figeait. Apparemment il bloquait lors du démarrage sur le chargement de l'OS...

Je l'ai revendu une misère pour pièce... 80€ à un courageux qui espérait le réparer, mais en vain..
C'était mon 1er Waldorf....

Je croise les doigts, mon Pulse tient encore !! :lol:
Marsupio37
5
j'ai exactement le même problème,l'écran est figé et aucun potard ou quoi que ce soit ne fonctionne.......icon_facepalm.gif

Et il se reboute toutes les 10 secondes environ.....:(((

[ Dernière édition du message le 07/10/2013 à 19:14:23 ]

6
Faut pas désespérer, pose la question à Marzac,
Moi, j'ai un Micro Q jaune qui dort sur une étagère, je le garde pour pièces: "'watchdog timeout'" sur l'écran.
Le bleu est toujours éveillé depuis quelques années.

Trouvé sur le net:

Citation :
[user-forum] Q Rack DSP Err


Hi there,
I had a similar experience,
I bought one second hand,(Q Rack Blue, without the voice expansion)and when switching on and off,
it gave me the dsp Err.
Any way, long story short, My Board is sill in Germany at Synthesizer Service Department, and
nearly six months later not a shred of good news,

Achim, who is very helpful, said that the board has "an unusual problem".
I'd say, if you can live without the voice expansion, then try get some kind of refund
for it,

Please let me know if you find any kind of resolution to this problem,

Kind regards,
Byron

On Thu, 24 Jul 2008 08:18:14 +0200, "Waldorf Q" <waldorfque at gmail.com> wrote:
> Hello,
>
> A few days ago I bought a second hand Waldorf Q rack blue with voice
> expansion. I tested it at the seller's place and it appeared OK. But,
> unfortunatelly, I forgot to turn it off/on and it was my mistake. At home,
> I
> started to play a little and then I turned it off and on again after 10
> seconds. The synth come up with the following error:
>
> DSP Err: --- --- RAM:
> --- --- --- ---
>
> Of course, the seller, "honest" as he is, never mentioned anything similar
> happened to him, and it provided all sorts of "proofs" that a synth was
> perfect but I got an impression that he is 100% aware of this problem and
> it
> was the reason for selling it.
>
> If I take the voice expansion out then everything is working as expected
> and
> DSP Err doesn't show again, no matter what I do - but in this case I only
> have 16-voice Q. After putting the expansion back in, everything reverts
> to
> the previous state. If I wait enough time after turning the synth off
> (about
> a minute or so) then it usually boots without problems.
>
> Yes, I reloaded OS and BOOT, tried BOOT 1.02 and 1.03, erased flash but
> the
> situation is the same. Measured the DC voltage from the power supply and
> it
> is 12V. All contacts inside the synth are OK. I also have another (older)
> expanded Q rack and it never behaved like this.
>
> It is not a big problem to me, because I usually don't turn the
> synthesizers
> off and on every few minutes, but I would like to know if anyone else
> experienced similar behavior and what is the cure for this, if any?
>
> Thanks.
>

Le plus majestueux des chênes n'était autrefois rien d'autre qu'un pauvre gland...

 

transmission-soundcloud

 

7
Salut,

Je n'avais pas donné de nouvelles de mon Waldorf Q.

La panne était le lecteur de carte QCard qui a bugé et qui a mit le Q en cacahuète.

Tout refonctionne donc comme au premier jour:bravo:
8
Comment as-tu fait pour le faire refonctionner ? réinitialisation ?

9
Super content pour toi...:bravo:

Le plus majestueux des chênes n'était autrefois rien d'autre qu'un pauvre gland...

 

transmission-soundcloud

 

10
C'est un pote électronicien qui me l'a réparé,le lecteur Card était apparement HS,il l'a changé et l'a réinitialisé effectivement.
Ne me demandé pas comment il a fait j'en sais rien car je n'y connais absolument rienicon_facepalm.gif