close
subdirectory_arrow_left subdirectory_arrow_left Claviers synthétiseurs analogiques
Matériel Claviers synthétiseurs analogiques {{currentManName}}swap_horiz Arturiaswap_horiz Rechercher une marquekeyboard_arrow_down
Astuce

Pb plantage à la mise à jour du firmware

Voici la réponse "type" de la hotline d'Arturia si la MàJ du Matrixbrute plante le synthé (synthé bloqué en bootloader mode):

"To get out of this state, have you tried to:

  • Power up your Matrixbrute with the ON/OFF switch, and immediately toggle ON/OFF 6-8 times the Audio Gate switch.
  • Then wait few seconds and reboot your Matrixbrute again.


The synth may potentially restart in it's normal state.

If not, please do as below:

  • Remove the "Matrixbrute" + "Updater" from your Midi Studio (Mac) or Windows device manager (Win)

  • Connect the USB cable to your computer.
  • Power up your Matrixbrute with the ON/OFF switch, and immediately toggle ON/OFF 6-8 times the Audio Gate switch.
  • Start the firmware update


If the firmware upgrade starts, that's great.
(The firmware may appear as unknown, but you should basically be able to click on it and proceed the firmware upgrade.)

If it fails, please try to repeat the whole operation. (Unplug, uninstall the device form the windows device Manager, Boot in DFU, upgrade the firmware.)
Once the firmware update succeeds, the unit should get back to it's normal state."

PS: Procédure testée avec succès le 7 octobre 2020.