close
subdirectory_arrow_left subdirectory_arrow_left Amplis de sono 4 canaux
Matériel Amplis de sono 4 canaux {{currentManName}}swap_horiz Nexoswap_horiz Rechercher une marquekeyboard_arrow_down

Nexo DTDAMP4X1.3

Fiche technique

  • Fabricant : Nexo
  • Modèle : DTDAMP4X1.3
  • Catégorie : Ampli de sono 4 canaux
  • Fiche créée le : 10/08/2018
Afficher les caractéristiques
KEY FEATURES
  • Two models of high-power, lightweight four channel amplifiers
  • Perfect match for the NEXO speakers supported by the DTD Controller
  • High-efficiency Switch Mode power supply and Amplifier channel design
  • Channels can be independently bridged two by two
  • Four Inputs on XLR connectors and four Outputs on SP-4 connectors
  • Extensive protection (Mains over/ undervoltage, temperature, DC outputs, current and voltage peak limiters, variable speed cooling system)
SPECIFICATIONS
Number of channels 4 x amplifiers channel, 2 by 2 bridgeable
Max. output voltage (no Load) 4 x 135 Volts
Max. output power (4 x 8 Ohms) 4 x 750 Watts
Max. output power (4 x 4 Ohms) 4 x 1300 Watts
Max. output power (2 brigde x 8 Ohms) 2 x 2600 Watts
Frequency response +/- 0.5 dB from 20 Hz to 20 kHz
Input impedance 10 kOhms
Input sensitivity +8 dBU
Nominal Gain 32 dB
Dynamic Range (A-weighted) > 110 dB
THD+N Typical 0.01%
FEATURES
Analog audio inputs 4 x balanced analog inputs on XLR
Power outputs 4 x SP4 outputs
Link switch To use same XLR input for 2 x adjacent channels
Mains sockets IEC C14 Inlet with secure lock
Switch and knobs Mains On/Off switch and volume control knob per channel
View meters 4 x LEDs (signal / -18 dB / -6 dB / Peak) per channel
Amplifier status Amp Ready and Temperature indicator per channels pairs
Mains voltage Factory set for 120 volts of 230 volts mains operation
Power consumption (Idle) 65 Watts
Power consumption 1/8 max. / 4 Ohms 900 Watts
Power consumption 1/4 max. / 4 Ohms 1800 Watts
Dimensions (W x H x D) 480 (W) x 44 (H) x 370 (D) mm, 19 inches / 1U
Weight 7.5 kg
Operating temperature range 0°C - 45 °C
CE conformity 2006/95/CE (Low voltage) 2004/108/CE (EMC) 2002/95/CE (RoHS)
Electrical safety certification CSA, CB, EN60065
EMC certification EN55103-1 / EN55103-2 / FCC
Masquer les caractéristiques

Photos

Avis utilisateurs

Acheter neuf Nexo DTDAMP4X1.3

Amplis de sono 4 canaux concurrents

Autres Amplis de sono 4 canaux Nexo

Autres dénominations : dtdamp4x13, dtdamp 4x 1 3, dtdamp4 x1 3, dtdamp4 x13, dtd amp 4x 1 3, dtd amp 4 x1 3, dtdamp4 x13, dtd amp4x1 3