Ajouter ce produit à

Mon ancien matos
Mon matos actuel
Mon futur matos

1/10

Doepfer A-111-2 High End VCO II / VCLFO

Name: A-111-2 High End VCO II / VCLFO
Brand: Doepfer
SKU: 261180

Module générateur pour synthé modulaire de la marque Doepfer appartenant à la série A-100

Écrire un avis ou Demander un avis

Présentation du produit Présentation

Avis

Comparateur de prix 3 3

Petites annonces

Forums

Sommaire - accès rapide

Images (9)
Fiche technique (1)

Acheter neuf Doepfer A-111-2 High End VCO II / VCLFO

Thomann En stock / Livré en 48h 245,00 €
Music Store En stock / Livré en 72h 245,00 €
Thomann En stock / Livré en 48h 255,00 €

Annonces A-111-2 High End VCO II / VCLFO

Alerte nouvelle annonce

Images

Voir les 9 photos du Doepfer A-111-2 High End VCO II / VCLFO

Fiche technique

Fabricant : Doepfer
Modèle : A-111-2 High End VCO II / VCLFO
Série : A-100
Catégorie : Modules générateurs pour synthés modulaires
Poids du colis : 262 g
Fiche créée le : 02/04/2017

Module A-111-2 is the successor of the obsolete High End VCO I A-111-1.

Here are the most important features of the planned module:

triangle core
fully analog design
min. 15 octaves pitch range (typ. 0.5Hz - 20kHz in VCO mode / 0.001Hz - 40Hz in LFO mode)
perfect 1V/octave tracking over min. 10 octaves (typ. 20Hz - 20kHz)
exponential frequency controls and inputs:
- Tune (about +/- 1 octave range)
- Fine (about +/- 1 semitone range)
- Octave (range switch with 6 positions)
- 1V/octave CV input
- XFM input with attenuator
- access to internal bus CV (via jumper, optional, please remove the bus jumper if this feature is not used to avoid unwanted frequency modulation as then the unused CV line of the bus works as a kind of antenna)
linear frequency controls and inputs:
- LF (manual linear frequency control: fully CW = standard setting for usual VCO applications, fully CCW: close to 0Hz frequency)
  works also as a kind of range control for the exponential section
- LFM input with attenuator, DC coupled
Pulsewidth controls and inputs (for rectangle output):
- PW (manual pulsewidth control from 0%/output = fixed at "low" state up to 100% / output fixed at "high" state)
- PWM input with attenuator
Hard Sync input
Soft Sync input
Waveform outputs:
- Sawtooth
- Rectangle (controlled from pulsewidth section)
- Triangle
- Sine
Range switch to select VCO/VCLFO mode, frequency relation between VCO mode and LFO mode about 1:500
dual color LED display (to display low frequencies below ~ 25 Hz)
Nearly "perfect" waveforms (no glitches)
high end triangle to sine converter with excellent sine waveshape (thank's to Tim Stinchcombe who recommended this circuit)
the micro precision VCO A-111-3 uses the same VCO core as the A-111-2, but has less inputs, outputs and controls

The following document shows the positions and functions of the jumpers and trimming potentiometers of the module: A111_2_trimming_potentiometers_and_jumpers.pdf

Distribué par mesi

Autres catégories dans Synthétiseurs modulaires

Autres dénominations : a 111 2 highendvco ii vclfo, a1112highendvcoiivclfo, a1112 highendvcoiivclfo, a111 2 high end vco ii vclfo, a 111 2high end vco ii vclfo, a 3 2 high end vco ii vclfo, a 3 2 highendvco ii vclfo, a32highendvcoiivclfo, a32 highendvcoiivclfo, a3 2 high end vco ii vclfo, a 3 2high end vco ii vclfo