Kilpatrick Audio K3020 Dual VCO

• Fabricant : Kilpatrick Audio
• Modèle : K3020 Dual VCO
• Catégorie : Modules générateurs pour synthés modulaires
• Fiche créée le : 29/04/2013

Eurorack Dual Voltage Controlled Oscillator - 36HP

• Eurorack (3U) form factor - 36HP width
• Dual VCO with independent power supplies per channel
• Backlit LCD screen with frequency counter for each channel
• LED indication of selected switch positions and VCO core activity
• Each channel:
  • 1V/octave CV input - factory trimmed for 1V/octave response
  • Linear FM input with level control
  • Fine and coarse tuning controls
  • Normal VCO frequency range: 2Hz to 15kHz
  • LFO mode switch - period: greater than 70 seconds to 8ms (120Hz)
  • Temperature compensated exponential converter with super-matched transistors
  • Wave shaper with sine, triangle or ramp waveforms - switch selectable
  • Pulse shaper with three pulse types - switch selectable
  • Voltage controlled mixing between wave and pulse waveforms
  • High-end blend VCAs with ultra-low distortion and linear control
  • Sync input for hard syncing of VCO core
  • PWM input with level and offset controls - full deflection with 5Vpk-pk
  • Blend VCA control input with level and offset controls - full deflection with 5Vpk-pk
  • Blend output - output from the blend VCA containing wave and/or pulse waveforms
  • Pulse output - dedicated output from the pulse shaper containing pulse waveform
• Internal cross modulation controls:
  • Pitch modulation control - exponential frequency modulation of VCO2 from VCO1
  • PWM modulation control - modulate VCO2 pulse width from VCO1
  • Blend modulation control - blend between WAVE and PULSE waves on VCO2 from VCO1
  • Internal PLL mode for locking VCO2 to VCO1
  • Internal Sync mode for syncing VCO2 to VCO1
• Wave mix output - buffered mix of VCO1 and VCO2 wave outputs - for FM effects
• XOR output - digital Exclusive OR output from both VCOs - for ring mod-like effects
• All inputs and outputs are tolerant of +/-12V
• All outputs drive 10Vp-p with 1K output impedance
• Requires +12V (200mA), -12V (100mA) - 16 pin Doepfer-style power cable used - approx. 3.5W total power consumption
• Designed and made in Canada using high quality parts.
• Warranty: 1 year