Se connecter
Se connecter

ou
Créer un compte

ou
Ajouter ce produit à
  • Mon ancien matos
  • Mon matos actuel
  • Mon futur matos
Commodore Amiga 2000
Photos
1/5

Commodore Amiga 2000

Autre Micro-ordinateur de la marque Commodore

1 avis
Comparateur de prix
Petites annonces
Forums

Annonces Amiga 2000

Alerte nouvelle annonce

Images

Avis

5.0/5
(1 avis)
100 %
(1 avis)
Donner un avis
Manolo_XSRManolo_XSR

Monstrueux

Commodore Amiga 2000Publié le 07/11/11 à 14:34
Chronologiquement j'ai eu un A500, un A2000, un A1000 & un A4030.
J'ai jouté les A600 & A1200 à mon "pedigree" vu le nombre d'Amigas que j'ai fait adopté à l'époque du lycée!
A Gisors, on pouvait chercher les 520St: il n'y en avait pas/plus!
Les rares possesseurs avaient migré vers l'Amiga.

Mon 2000 s'est vu équipé au fur & à mesure d'un HD, d'une carte accelératrice 68030+68882 25Mhz.
Mon 1084 de 1987 était son écran de prédilection.
»

Fiche technique

  • Fabricant : Commodore
  • Modèle : Amiga 2000
  • Catégorie : Autres Micro-ordinateurs
  • Fiche créée le : 15/03/2003
 

Variants

A1500 
A2000 
A2000HD 
A2500/020 
A2500/030 
A2500UX 

In 1987 Commodore released its first highly expandable machine, the A2000. Early models are based around the A1000 design but most models are built around the A500 chip set. The A2000HD shipped with an A209x SCSI controller and a SCSI hard disk drive installed. The A2500 has a processor card added to the A2000HD configuration. The A1500 shipped with two floppy drives but no hard disk drive. 
The A2500UX shipped with AT&T Unix System V Release 4 operating system instead of AmigaOS, a three button mouse, and usually with a tape streamer and Ethernet card.

Processor

68000 @ 7-28 MHz 
68020 @ 7-25 MHz 
68030 @ 16-50 MHz 
68040 @ 25-40 MHz 
68060 @ 50 MHz

The A1500 and A2000 have a socketed 68000 @ 7.14 MHz processor on their motherboard and they shipped with an empty processor slot. The A2500 use a processor card. The A2500/020 shipped with an A2620 processor card featuring a 68020 and 68881 @ 14 MHz, and the A2500/030 with an A2630 featuring a 68030 and 68882 @ 25 MHz.

Memory

up to 2 MB Chip RAM 
up to 128 MB Fast RAM on processor cards 
up to 8 MB Fast RAM on Zorro II expansion cards

Most A2000 models have 1 MB RAM soldered to their motherboard. Early models, the 3.x series, have 512 kB Chip RAM on their motherboard and 512 kB Fast RAM on their processor card. The 4.x series have both 512 kB Chip and Fast RAM soldered to their motherboard, whilst the 6.x series have their RAM set up as 1 MB Chip RAM. Chip RAM can be expanded to 2 MB with third party expansions which replace the Agnus chip. 
24 bit Fast RAM can be added using Zorro II expansion cards up to 8 MB, and 32 bit Fast RAM using processor cards featuring a 68020 or better.

Custom chips

Agnus / Fat Agnus - OCS / ECS display controller 
Denise / Super Denise - OCS / ECS display encoder 
Paula - audio and I/O controller 
Gary - system address decoder 
Buster - DMA arbitrary controller

The A2000 OCS or ECS chip set offers the same screen modes as the A500 and A500 Plus:

  A500   A500+    
Low High Low High Super
PAL, non-interlaced
PAL, interlaced
NTSC, non-interlaced
NTSC, interlaced
320×256
320×512
320×200
320×400
640×256
640×512
640×200
640×400
320×256
320×512
320×200
320×400
640×256
640×512
640×200
640×400
1280×256
1280×512
1280×200
1280×400
50 Hz, 15.60 kHz
50 Hz, 15.60 kHz
60 Hz, 15.72 kHz
60 Hz, 15.72 kHz
Euro36
A2024
  320×200 - 1280×400
1024×1024
73 Hz, 15.76 kHz
15 Hz, 15.72 kHz
Multiscan
Euro72
Super72
  640×480 - 640×960
640×400 - 640×800
400×300 - 800×600
60 Hz, 31.44 kHz
70 Hz, 31.43 kHz
72 Hz, 24.62 kHz

A2000s using the OCS chip set support either PAL or NTSC screen modes, not both. 
Low resolution screen modes offer up to 32 colours from a palette of 4096, 64 in EHB mode or 4096 in HAM mode. High resolution screen modes offer 16 colours from 4096, super-high resolution and productivity modes offer 4 colours from a palette of 64. Other screen modes require a Zorro graphics card. 
4 channel stereo 8 bit audio output with frequencies up to 28 kHz when using screen modes with 15 kHz, or up to 56 kHz when using screen modes with higher horizontal frequency. 16 bit audio requires a Zorro sound card. 
A2000s with the OCS chip set shipped with Kickstart 1.2 first, later with 1.3. The ECS models all shipped with 2.04 Kickstart ROM. All versions can be replaced with a 3.1 one.

Expansion slots

1× processor card slot (CPU slot) 
5× Zorro II slots 
1× video slot 
2× inactive AT ISA slots 
2× inactive XT ISA slots

The Zorro, ISA and video slots are all placed on the motherboard. Two AT ISA slots are in line with a Zorro II slot, while the XT and video slots are not. 
In early A2000s the video slot just use the signals of the external 23 pin video connector, others are extended with the remaining digital video signals and some parallel port lines. 
The four ISA slots have their power and ground pins activated only. In order to access the slots by the A2000 a BridgeBoard has to be installed. With an installed BridgeBoard, two or three ISA compatible cards can be used depending on the BridgeBoard's position - if it is installed in slot 3 two ISA and four Zorro cards can be used, if it is in slot 4 three ISA and three Zorro cards are possible. Inactive ISA slots can be used for non intelligent cards like TBCs or fan cards. The two XT ISA slots can be upgraded to AT slots by simply soldering the 16 bit extension slots. 
Early A2000s implement an internal version of the A1000 external edge connector as processor card slot. All other revisions use a 86 pin processor card slot with a coprocessor interface which allows processor cards to be added without the need to remove the 68000.

The A2000 has a vast array of upgrade options, including processor cardsSCSI or IDE controllers, retargetable graphics cardsvideo digitizersethernet cards and many other types of expansion.

Drive bays

2× 3.5" front bays 
1× 5.25" front bay

In the A2000 one, in the A1500 both of the 3.5" bays are occupied with 880 kB double density floppy disk drives.

Interfaces

1× serial DB25 male, RS232 
1× internal serial 26 pin header 
1× parallel DB25 female, Centronics 
1× video DB23 male, analog RGB 
1× composite, black & white 
2× mouse/game DB9 male 
2× stereo audio RCA jack 
1× keyboard 5 pin DIN female 
1× external floppy DB23 female 
1× internal floppy 34 pin header

The floppy drive controller supports up to four devices - two attached to the internal floppy header and two connected to the external floppy port. Both double and high density disk drives are supported. 
The internal serial header has the same address as the external one. It is intended to be used with internal MIDI interfaces.

Motherboard revisions

A2000-A: (Photo
It is based on the integration of the A1000 motherboard design and an example Zorro II backplane. It uses the thin Agnus (DIP) which handles only 512 kB RAM. The video slot is just an internal version of the external video port and the processor card slot is just an internal version of the A1000 external edge connector. The A2000-A has many reliability problems. The Buster chip is missing, so as the composite output connector. Memory is configured as 512 kB Chip RAM on motherboard and 512 kB Fast RAM in the processor slot.

A2000-B: 
It is basically a cost reduced version based around the A500 chip set. Most of the control logic for the expansion bus is integrated into the Buster chip. The video slot is extended with more signals and the CPU slot has a coprocessor interface. A black and white composite video connector is provided. 1 MB of RAM is placed on the motherboard.

revision 3.9
pre-production A2000-B intended for demonstration purposes
may have problems with processor cards as there is no additional buffering on the clocks that drive the CPU slot
revision 4.0
extra buffering splits Agnus clocks between the expansion and CPU slots
rev 4.1
correction of one missing signal on the video slot - no rev 4.0 boards were released because of this bug
rev 4.2
some unnecessary filter capacitors are removed to fix the character loss for HITEK type keyboards
rev 4.3
the Toshiba made Gary is replaced with a CSG (MOS) one, pull-up resistors added to support it
rev 4.4
changes in filtering of a noisy line, cost reduction
rev 4.5 (Photo)
fixes a problem in conjunction with expansion bus DMA turnaround
uses Kickstart 1.3
revision 5.0
motherboard RAM use 256k×4 chips instead of 256k×1 ones
revision 6.0
some layout and FCC changes
rev 6.1
reset IC added to clean up RAM retention
correction of the noise on the "time of day" clock
uses Agnus 8372
rev 6.2 (Photo)
correction of the noise on the expansion bus caused by a new production of 68000s
fix to get certain expansion boards to work correctly with 256k×4 DRAMs and Agnus 8372
rev 6.5
uses Kickstart 2.04 ROMs and the ECS chip set: Fat Agnus, Super Denise
Power supply

220 W power output 
2× standard 4 pin power connectors 
2× mini 4 pin floppy drive power connectors

 

»

Autres catégories dans Micro-ordinateurs

Autres dénominations : amiga 2000, amiga2000, amiga 20 00, amiga20 00